OPERATIONS (continued)
No Signal Menu
The same adjustments and settings are available as with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.Select an item with the 
and 
buttons, and start or stop operation with the 
and 
buttons.
VOLUME
BLANK
START UP MIRROR
MENU COLOR 
LANGUAGE 
AUTO OFF
SYNC ON G 
WHISPER 
IR REMOTE 
16
Table 8. No Signal Menu
Item |
|
| Description |
|
| |
| Reduce | ↔ | Increase |
|
| |
VOLUME | • When this function is used, audio input is automatically switched to video. The audio input can | |||||
be switched by moving the DISK PAD left and right during the display of the volume adjustment | ||||||
| ||||||
| bar. The volume adjustment bar is displayed by pressing VOLUME | / | button. | |||
|
| |||||
| Select Blank Screen: Select the screen in case of the BLANK mode with the / | |||||
| button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the | |||||
BLANK | BLANK mode is ON. |
|
| |||
MyScreen is a mode that the | ||||||
| blue screen at the factory setting. Refer to the description of MyScreen below. | |||||
| ORIGINAL is a mode that the factory fixed screen is displayed. |
| ||||
• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.
| Select Start Up Screen: Select the screen in case of no signal input with the / button. | ||
| The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed when no signal is input. | ||
START UP | My Screen is a mode that the | ||
blue screen at the factory setting. Refer to the description of MyScreen below. | |||
| ORIGINAL is a mode that the factory fixed screen is displayed. |
| |
| TURN OFF displays the blue screen. |
|
|
| • When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes. | ||
|
|
|
|
MIRROR | Select Mirror Status: Select the mirror status with the | / | button. |
MENU COLOR Select Menu Background Color: Select the color with the 
/ 
button.
LANGUAGE Select Menu Display Language: Select the language with the 
/ 
button.
AUTO OFF
Set AUTO OFF: Set 1~99 minutes with the 
/ 
button. The system automatically enters the standby mode when a signal is not received for the set time.
Clear AUTO OFF: Select the STOP (0 min.) with the 
button. When the STOP is selected the system does not enter the standby mode even if no signal is received.
SYNC ON G Valid: Select the TURN ON with the 
button.
SYNC ON G Invalid: Select the TURN OFF with the 
button.
SYNC ON G • May not be displayed correctly with some input signals when the SYNC ON G is valid. In such cases, remove the signal connector so that no signal is received, set the SYNC ON G to invalid, and reconnect the signal.
Set / Crear WHISPER Mode: Press the 
/ 
button. When the WHISPER is
WHISPER selected, the WHISPER mode is active. In the WHISPER mode, acoustic moise level from the unit is reduced, and brightness level on screen is a little lower.
Select Remote Control Sensor: Select the sensors to activate along the menu with
the 
/ 
button. Use this function if the remote does not work stably. The ambient light may affect the remote.
IR REMOTE | VOLUME | 2 |
|
BLANK |
| ||
| START UP |
| 3 |
MIRROR | 1 |
|
MENU COLOR | 1 | 2 3 |
AUTO OFF |
| : active |
LANGUAGE |
|
|
SYNC ON G |
| : inactive |
WHISPER |
|
IR REMOTE 