Multifunctional settings
SETUP Menu
With the SETUP menu, the items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.
MENU [RGB] | :SELECT |
PICTURE | KEYSTONE +0 |
IMAGE | WHISPER NORMAL |
INPUT | MIRROR NORMAL |
SETUP | VOLUME 16 |
SCREEN | AUDIO |
OPTION |
|
EASY MENU |
|
Item
Description
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data Lower in the data
•The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.
KEYSTONE | • When the V:INVERT or the H&V:INVERT is selected under the |
| item MIRROR, if the projector screen is inclined or if the projector is |
| angled downward, this function may not work correctly. |
•When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible.
Using the buttons ▲/▼ turns off/on the whisper mode.
WHISPER | NORMAL WHISPER | |
• When the WHISPER is selected, acoustic noise and screen | ||
| ||
| brightness are reduced. |
Using the buttons ▲/▼ switches the mode for mirror status.
MIRROR
NORMAL H:INVERT V:INVERT H&V:INVERT
VOLUME | Using the buttons ▲/▼ adjusts the volume. | |
High Low | ||
|
| Choose an input port using the buttons ▲/▼ | AUDIO |
|
| (1), then select the audio port to be interlocked | QUIT |
|
| with the input port using the buttons ◄/► (2). |
| 1 2 |
| RGB1 |
| |
AUDIO | When off is selected, both of two audio ports | RGB2 |
|
do not work for the input port. | S‑VIDEO |
| |
|
| COMPONENT |
|
|
| VIDEO |
|
(1)RGB1 RGB2 COMPONENT
(2)1 2 
34