Dukane 8755D-RJ Electrical power cord is not plugged, Power switch is not set to the on position

Page 52

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer or service company.

1. Before requesting repair, please check in accordance with the following chart. This

operation sometimes resolves your problem. If the situation cannot be corrected,

2. The projector’s microprocessor may need to be

reset. Please push the Restart switch by using a cocktail stick or similar and the projector will restart.

3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (39) to reset all settings to factory default.

Then, if the problem is not removed after the remedy, please contact your dealer or service company.

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The electrical power cord is not plugged in.

14

 

Correctly connect the power cord.

 

 

 

The power switch is not set to the on position.

17

 

Set the power switch to [ ] (On).

 

 

 

The main power source has been interrupted during

 

Power does not

operation such as by a power outage (blackout), etc.

17

Please turn the power off, and allow the projector to cool

come on.

down at least 2 minutes. After the projector has sufficiently

 

 

cooled down, please turn the power on again.

 

 

Either there is no lamp and/or lamp cover, or either

 

 

of these has not been properly fixed.

 

 

Please turn the power off, and allow the projector to cool down

40, 41

 

at least 45 minutes. After the projector has sufficiently cooled

 

 

 

down, please make confirmation of the attachment state of the

 

 

lamp and lamp cover, and then turn the power on again.

 

 

The signal cables are not correctly connected.

12, 13

 

Correctly connect the connection cables.

 

 

 

Signal source does not correctly work.

–

Neither sounds

Correctly set up the signal source device by referring to the

manual of the source device.

 

nor pictures are

 

The input changeover settings are mismatched.

18

outputted.

Select the input signal, and correct the settings.

 

 

 

The RGB IN2 port is assigned to an RGB out while

12

 

an RGB input signal is inputted to the port.

 

Push the RGB IN OUT switch to switch the function of the port.

 

50

Page 51 Page 53
Image 52
Page 51 Page 53
Contents USER’S Manual Page Thank you for purchasing this projector About this manualTrademark acknowledgment Content About contents of package Fastening the lens cover Part names ProjectorComponent Video ports 13CB/PB CR/PRRemote control Control buttonsCursor buttons ,,, 24 STANDBY/ON button 17 Video button 19 Aspect button 19Setting up For the model ArrangementFor the model 8755D & 8755D-RJ Adjusting the projectors elevator Elevator feet Elevator buttonHow to attach Using the Security BarSecurity Bar Anti-theft chain or wire sold separately Connecting your devices About Plug-and-Play capabilityConnecting to a speaker with amplifier output Connecting to a monitor outputExamples of connection with a computer Examples of connection with a VCR/DVD player 8755D-RJ OnlyAudio R out Audio L out Audio R outConnecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control 30º 30º Approx metersPower on/off Turning on the powerTurning off the power Indicator will go off. Attach the lens coverAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focusSelecting an input signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the positionPress the Auto button on the remote control  For a video signal or s-video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Move pointerMultifunctional settings Using the menu functionEasy Menu Advanced MenuEasy Menu Reset Easy MenuMirror Filter TimePicture Menu GammaPicture Menu High  Middle  LOW  CustomColor Temp SecamTV  Film  Turn OFF ProgressiveLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Phase Image MenuOver Scan PositionAuto Adjust Image MenuSize ExecuteInput Menu Color SpaceVideo Format Frame LockInput Menu InformationVolume Setup MenuAudio Screen Menu Menu PositionOSD Bright Bright  DarkStart UP Screen MenuMyScreen Lock Message Using the buttons / turns on/off the message functionNo Input is Detected Reset  Cancel Option MenuAuto Search Auto OFFOption Menu Lamp MaintenanceLamp Case of replacement by yourself LampType number = DT00731 Lamp cover Screw Screws HandleType number = NJ22222 Air filterHandle Filter cover Internal Clock Battery Model 8755D-RJ OnlyAir filtre Air filter’s knobPage Take the old battery out Replacing Internal Clock battery 8755D-RJ onlyWill come up. Remove the battery Put a new battery Page There is no input signal Internal temperature is risingRelated messages Is out of the response parameter range of this unitRegarding the indicator lamps Regarding the indicator lamps It is time to clean the air filterCooling fan is not operating There is a possibility that the interior portionElectrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeSpecification RGB input Video inputAudio input Communication port Audio outputSpecifications 8755D-RJ only Dhcp Network Menu 8755D-RJ only! LANIP Address Network Menu Information display Network information and confirm settingsUse the or Enter buttons to view Failure & Warning Alerts via E-mail Projector Management via SnmpControlling the Projector via Scheduling Still Image TransferNetwork Functions Notes Before using the network functions… Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Settings Https//192.168.1.10 intoDisplays the Dhcp configuration settings Network InformationNetwork Settings Displays and configures network settingsDhcp on Dhcp OFFDisplays and configures communication port settings Port SettingsClick the Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsAlert Settings Displays and configures failure & warning alertsAlert Settings Lamp ErrorTemp Error Air Flow ErrorCool Error Lamp Time ErrorFilter Error Schedule Execution Error Other ErrorLamp Time Alarm Filter Time Alarm Authentication FailureChange the Lamp is DisplayedSchedule Settings Displays and configures schedule settingsSchedule Setting Displays and configures the date and time settings Date/Time SettingsParameter Date/Time Settings SntpSecurity Settings SnmpProjector Control Projector ControlProjector Control Projector Status Displays and configures the current projector statusNetwork Restart LogoffRestarts the projector’s network connection Description Restart10 Failure & Warning Alerts via E -mailExample If the IP address of the projector is set to Mail Settings Projector management via Snmp Snmp settingsConfigure the following items via a web browser to use Snmp Controlling the Projector via Scheduling Date/Time Settings 18 Date/Time setting can be adjusted via a web browserSchedule Settings 16 Schedule settings can be configured from a web browserShot Still Image Transfer Settings Shot Still Image Transfer DisplayCommunication Port Following port is used for e-Shot TCP #9716Shot Still Image Transfer Settings Shot Still Image Transfer TransmissionCommand Control via the Network Command Control Settings 9Command Control Settings 20Command format Reply Error codeHeader Data RS-232Ccommand Send Data formatReply Data format Authentication Automatic Connection BreakPage Vesa Text Example of computer signalVesa Initial set signals Except when set to RGB OUT Connection to the portsPort Signal Mini DIN 4pin jack PinRCA jack 100RTS Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackCTS Communications setting Connecting the cableRS-232C Communication Requesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command104 RS-232C Communication105 106 107 108 109 110 Page Audio Visual Products

8755D-RJ, 8065, 8755D specifications

The Dukane 8755D, 8065, and 8755D-RJ are innovative ultrasonic welding machines designed to accommodate a wide range of industrial applications. Renowned for their advanced technology and reliable performance, these models exemplify the prowess of Dukane in the field of ultrasonic joining solutions.

The Dukane 8755D offers exceptional versatility and precision, making it ideal for applications in various sectors, including automotive, medical devices, and consumer electronics. One of its standout features is the use of a digital frequency generator, which ensures exact frequency control and stability. This technology allows for efficient energy transfer during the welding process, resulting in stronger and cleaner welds. Additionally, the machine includes adjustable amplitude settings, enabling operators to fine-tune the welding parameters according to specific material requirements.

The Dukane 8065 model complements the 8755D with its powerful ultrasonic capabilities and user-friendly interface. It is equipped with advanced software that facilitates real-time monitoring and data collection, allowing for comprehensive quality control throughout the welding process. The 8065 also features an ergonomic design, improving operator comfort and efficiency during prolonged use, which is essential in high-volume production settings.

The 8755D-RJ model stands out for its integration of enhanced communication features, suited for applications where connectivity and automation are paramount. Its RJ interface allows seamless integration with other machinery and automation systems, making it an excellent choice for smart manufacturing environments. This model also includes robust safety features to protect operators and equipment, ensuring a safe working environment.

All three machines leverage Dukane's proprietary ultrasonic technology, which provides consistent weld quality while minimizing energy consumption. Their compact design allows for easy integration into existing production lines without significant modifications. The ability to process a wide variety of materials, including thermoplastics and metals, further enhances the adaptability of these ultrasonic welders.

In summary, the Dukane 8755D, 8065, and 8755D-RJ represent cutting-edge ultrasonic welding solutions tailored for diverse industrial applications. With their advanced features, innovative technologies, and user-friendly designs, these models ensure high-quality welds and enhanced production efficiency, making them invaluable assets in any manufacturing process.
Top Page Image Contents