Dukane 8065 user manual Replacing Internal Clock battery 8755D-RJ only, Take the old battery out

Page 47

Maintenance

Replacing Internal Clock battery (8755D-RJ only!)

Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped, please replace the battery according to the following procedures.

WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

•Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

•Make sure the plus and minus terminals are correctly aligned when loading a battery.

If the battery is placed in the battery holder upside-down, it may be hard to remove.

•Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

•Do not short circuit or solder a battery.

•Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

•If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the liquid adheres to your body or clothes, rinse well with water immediately.

•Obey the local laws on disposing the battery.

1.

Turn the projector off, and unplug the power cord. Allow the

 

 

 

 

 

projector to cool sufficiently.

 

 

 

 

 

2.

After making sure that the projector has cooled adequately,

 

 

 

 

 

slowly turn over the projector, so that the bottom is facing.

 

 

 

 

 

3.

Remove the battery cover.

Battery Cover

Turn the battery cover in the direction indicated “OPEN”

 

 

 

 

 

using such as coins. Then the battery cover will come up. While

 

 

 

 

 

removing the battery cover, pick its knob.

OPEN

4.

Take the old battery out.

Knob

 

 

Press the metal claw of the battery holder. Then the battery

Metal claw

will come up. Remove the battery.

 

 

 

 

 

5.

Put a new battery in.

 

 

 

 

 

Replace battery with HITACHI MAXELL, Part No.CR2032

 

 

 

 

 

only. Use of another battery may present a risk of fire or

 

 

 

 

 

explosion.

“+” marking

Insert a new battery in the battery holder according to its minus terminal

 

 

 

 

 

as indicated in the battery holder, so that the side marked by + is

 

 

 

 

 

 

 

 

 

 

 

 

facing. And push the battery into the battery holder fully to fix.

 

 

 

 

 

6.

Close the battery cover.

CLOSE

 

 

 

 

 

 

 

 

 

 

 

 

Replace the battery cover in place, then turn it in the

 

 

 

 

 

direction indicated “CLOSE” using such as coins, to fix.

If the battery is placed in the battery holder upside-down, follow the procedure below to remove and reload it properly.

1.Remove the battery cover as described in steps 1 through 3 above.

2.Turn the projector over again, so that the top of the projector is facing up.

3.While lifting the side of the projector closest to the lens, press the metal claw of the battery holder. The battery will fall out of the holder, so be careful not to lose it.

4.Turn the projector over once more, so that the bottom faces up, and reload the battery correctly.

NOTE • The internal clock’s time will be reset when the battery is removed. Please reconfigure the time via the menu or a web browser after replacing the battery. (Please refer to page76 - Network Functions: Date/Time Settings for more information.)

45

Page 46 Page 48
Image 47
Page 46 Page 48
Contents USER’S Manual Page Trademark acknowledgment About this manualThank you for purchasing this projector Content About contents of package Fastening the lens cover Projector Part namesCR/PR ComponentVideo ports 13 CB/PBVideo button 19 Aspect button 19 Remote controlControl buttons Cursor buttons ,,, 24 STANDBY/ON button 17Setting up For the model 8755D & 8755D-RJ ArrangementFor the model Elevator feet Elevator button Adjusting the projectors elevatorSecurity Bar Anti-theft chain or wire sold separately Using the Security BarHow to attach About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output Audio R out Examples of connection with a VCR/DVD player8755D-RJ Only Audio R out Audio L outAC inlet Connector Power cord Connecting power supplyPutting batteries Remote control30º 30º Approx meters Using the remote controlIndicator will go off. Attach the lens cover Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal OperatingSelecting an aspect ratio Searching an input signalAdjusting the zoom and focus Selecting an input signal For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position Press the Auto button on the remote controlCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenMove pointer Available function Remote control operationOperating the computer screen USB mouse and keyboard controlAdvanced Menu Multifunctional settingsUsing the menu function Easy MenuEasy Menu Filter Time ResetEasy Menu MirrorGamma Picture MenuSecam Picture MenuHigh  Middle  LOW  Custom Color TempSAVE4 SAVE3  SAVE2  SAVE1 TV  Film  Turn OFFProgressive LOAD1  LOAD2  LOAD3  LOAD4Position PhaseImage Menu Over ScanExecute Auto AdjustImage Menu SizeFrame Lock Input MenuColor Space Video FormatInformation Input MenuAudio Setup MenuVolume Bright  Dark Screen MenuMenu Position OSD BrightMyScreen Lock Screen MenuStart UP No Input is Detected Using the buttons / turns on/off the message functionMessage Auto OFF Reset  CancelOption Menu Auto SearchOption Menu Lamp MaintenanceLamp Lamp cover Screw Screws Handle Case of replacement by yourselfLamp Type number = DT00731Handle Filter cover Air filterType number = NJ22222 Air filter’s knob Internal Clock BatteryModel 8755D-RJ Only Air filtrePage Will come up. Remove the battery Put a new battery Replacing Internal Clock battery 8755D-RJ onlyTake the old battery out Page Is out of the response parameter range of this unit There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps There is a possibility that the interior portion Regarding the indicator lampsIt is time to clean the air filter Cooling fan is not operatingSignal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedColor Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjustedLamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is workingAudio output SpecificationRGB input Video input Audio input Communication portSpecifications 8755D-RJ only IP Address Network Menu 8755D-RJ only! LANDhcp Network Menu Use the or Enter buttons to view Network information and confirm settingsInformation display Still Image Transfer Failure & Warning Alerts via E-mailProjector Management via Snmp Controlling the Projector via SchedulingNetwork Functions Notes Before using the network functions… Configuring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Https//192.168.1.10 into SettingsNetwork Information Displays the Dhcp configuration settingsDhcp OFF Network SettingsDisplays and configures network settings Dhcp onClick the Apply button to save the settings Port SettingsDisplays and configures communication port settings Displays and configures e-mail addressing settings Mail SettingsDisplays and configures failure & warning alerts Alert SettingsAir Flow Error Alert SettingsLamp Error Temp ErrorFilter Error Lamp Time ErrorCool Error Lamp Time Alarm Other ErrorSchedule Execution Error Displayed Filter Time AlarmAuthentication Failure Change the Lamp isDisplays and configures schedule settings Schedule SettingsSchedule Setting Parameter Date/Time SettingsDisplays and configures the date and time settings Sntp Date/Time SettingsSnmp Security SettingsProjector Control Projector ControlProjector Control Displays and configures the current projector status Projector StatusDescription Restart Network RestartLogoff Restarts the projector’s network connectionExample If the IP address of the projector is set to Failure & Warning Alerts via E -mail10 Mail Settings Configure the following items via a web browser to use Snmp Snmp settingsProjector management via Snmp Controlling the Projector via Scheduling Date/Time setting can be adjusted via a web browser Date/Time Settings 18Schedule settings can be configured from a web browser Schedule Settings 16Following port is used for e-Shot TCP #9716 Shot Still Image Transfer SettingsShot Still Image Transfer Display Communication PortShot Still Image Transfer Transmission Shot Still Image Transfer SettingsCommand Control Settings 9 Command Control via the Network20 Command Control SettingsSend Data format Command formatReply Error code Header Data RS-232CcommandReply Data format Automatic Connection Break AuthenticationPage Vesa Example of computer signalVesa Text Initial set signals Connection to the ports Except when set to RGB OUT100 Port SignalMini DIN 4pin jack Pin RCA jackCTS Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackRTS RS-232C Communication Connecting the cableCommunications setting Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandRS-232C Communication 104105 106 107 108 109 110 Page Audio Visual Products

8755D-RJ, 8065, 8755D specifications

The Dukane 8755D, 8065, and 8755D-RJ are innovative ultrasonic welding machines designed to accommodate a wide range of industrial applications. Renowned for their advanced technology and reliable performance, these models exemplify the prowess of Dukane in the field of ultrasonic joining solutions.

The Dukane 8755D offers exceptional versatility and precision, making it ideal for applications in various sectors, including automotive, medical devices, and consumer electronics. One of its standout features is the use of a digital frequency generator, which ensures exact frequency control and stability. This technology allows for efficient energy transfer during the welding process, resulting in stronger and cleaner welds. Additionally, the machine includes adjustable amplitude settings, enabling operators to fine-tune the welding parameters according to specific material requirements.

The Dukane 8065 model complements the 8755D with its powerful ultrasonic capabilities and user-friendly interface. It is equipped with advanced software that facilitates real-time monitoring and data collection, allowing for comprehensive quality control throughout the welding process. The 8065 also features an ergonomic design, improving operator comfort and efficiency during prolonged use, which is essential in high-volume production settings.

The 8755D-RJ model stands out for its integration of enhanced communication features, suited for applications where connectivity and automation are paramount. Its RJ interface allows seamless integration with other machinery and automation systems, making it an excellent choice for smart manufacturing environments. This model also includes robust safety features to protect operators and equipment, ensuring a safe working environment.

All three machines leverage Dukane's proprietary ultrasonic technology, which provides consistent weld quality while minimizing energy consumption. Their compact design allows for easy integration into existing production lines without significant modifications. The ability to process a wide variety of materials, including thermoplastics and metals, further enhances the adaptability of these ultrasonic welders.

In summary, the Dukane 8755D, 8065, and 8755D-RJ represent cutting-edge ultrasonic welding solutions tailored for diverse industrial applications. With their advanced features, innovative technologies, and user-friendly designs, these models ensure high-quality welds and enhanced production efficiency, making them invaluable assets in any manufacturing process.
Top Page Image Contents