Operating the PC Screen

Dukane 28A8247 user manual Operating the PC Screen, Available Functions Remote Control Operation

You can use the remote control as a simplified mouse or keyboard.

CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.

•Only connect to a PC.

•Before connecting, read the manuals of the device you will connect.

•Do not unplug the connector cables while the computer is operating.

LASER

INDICATOR

STANDBY/ON VIDEO RGB

	UP
FOCUS ZOOM	PAGE
	DOWN
BLANK	LASER

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION AUTO PinP

MAGNIFY	VOLUME
ON
FREEZE	MUTE
OFF
WIRELESS KEYSTONE	ONE TOUCH

PS/2, ADB, Serial Mouse Control

1.Turn off the projector and PC power, and connect the projector’s CONTROL terminal to the computer via the mouse cable.

2.If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control function is given priority, and mouse control from the CONTROL terminal will not function.

3.Turn on the projector power, then the computer.

The functions in the table below can be controlled. If you have difficulty with control, restart the computer (either from the software or by pressing the restart button).

Available Functions	Remote Control Operation
Move Pointer	Move using	on the disk pad
Left click with mouse	Press the center	of the disk pad
Right click with mouse	Press the right mouse button

USB Mouse/Keyboard Control

1.Connect the projector’s USB terminal to a PC using a USB cable. The functions in the table below can be controlled.

Available Functions		Remote Control Operation

Move Pointer		Move using	on the disk pad

Left click with mouse		Press the center	of the disk pad

Right click with mouse		Press the right mouse button

Press the keyboard’s	keys	Press

Press the keyboard’s ENTER key		Press the ENTER button

Press keyboard’s PAGE UP key		Press PAGE UP button

Press keyboard’s PAGE DOWN key		Press PAGE DOWN button

Press keyboard’s ESC key		Press ESC button

NOTES

•It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g. track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

•The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

•The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

•This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.