Dukane 28A8247 user manual Auto Menu

AUTO Menu

With the AUTO menu, the four items shown in the Table below can be performed.

Please perform each operation in accordance with the instructions in the Table.

MENU
MAIN	ADJUST	EXECUTE
PICTURE-1	KEYSTONE
PICTURE-2	POWER OFF
INPUT	ONE TOUCH
AUTO
SCREEN
OPTION
WIRELESS
: SELECT

Example : AUTO Menu

(ADJUST)

AUTO Menu

Item	Description
	Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H
	PHASE, and H SIZE. Use this function with the maximum window size.
	Auto Adjust (for VIDEO/S-VIDEO):This function automatically selects the
	appropriate signal mode depending on input signals. This is only performed if
ADJUST	AUTO is selected on the VIDEO menu item (	4 ) of the INPUT menu.
	• This function may not be available with a PAL60 signal and certain other
	signals.
	• The AUTO mode operation requires approximately 10 seconds.
	• For COMPONENT VIDEO, the signal type is identified automatically even if this
	function is inactive. For more information on HDTV signals, see HDTV. ( 4 )
	Automatic keystone distortion correction:
	You can automatically correct vertical keystone distortion corresponding to the
	angle (forward/backward tilt) at which the unit is set up.
	• If the projection screen is inclined, or if the projector is angled downwards, it
KEYSTONE	may not be possible to make the correct adjustment when V: INVERT or H&V:
	INVERT is selected under the MIRROR item of the MAIN menu.
	• When the zoom adjustment is set to the TELE side, automatic correction may
	be excessive. The automatic correction function should be used with zoom
	set to WIDE whenever possible.
	Adjust POWER OFF Time:
	Long (MAX. 99 min.) ⇔ Short (Min. 1 min.)	⇔ (DISABLE: 0 min.)
POWER OFF	If the time set here passes without valid signal input (there is no signal input, or
	signal input is out of specifications), the standby mode is set (see "TURNING
	ON THE POWER" Vol.1 15 ). This function is inactive when DISABLE (0 min.) is
	selected.

ONE TOUCH

Enabling/disabling the KEYSTONE function using the ONE TOUCH button:

TURN ON ⇔ TURN OFF

Pressing the ONE TOUCH button will automatically retrieve pictures and automatically adjust the screen (see “ADJUSTING SCREEN WITH ONE- TOUCH” Vol.1 23 ), and you can also set the function to execute KEYSTONE (see above in this table) simultaneously when pressed. KEYSTONE will be

executed if TURN ON is selected.

5