Dukane 28A8247 user manual Multifunctional Settings, Main Menu, Item selection

Page 41

MULTIFUNCTIONAL SETTINGS

This device has 8 separate menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION, WIRELESS. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.

Menu screen display : Press the "MENU" button.

Menu selection : Use the lever switch / to select a menu name, then press the or ENTER button.

Item selection	: Use the lever switch / to select an item, then press the	or
	ENTER button.

Return menu to last previous screen: Press the button or the ESC button.

Execution of settings and/or adjustments: Perform the operation using the lever switch / .

(For further details, read the explanation for each separate menu.)

Initialization of settings and/or adjustments: During operation, press the RESET button. (Functions that are executed at the same time as a selection, including H PHASE, LANGUAGE selection, and ADJUST, will not be reset.)

End menu operations: Press the MENU button, or do not perform any operation for several seconds.

MAIN Menu

With the MAIN menu, the seven items shown in the Table below can be performed.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN	BRIGHT
PICTURE-1	CONTRAST
PICTURE-2	ASPECT
INPUT	PICT. POSIT.
AUTO	GAMMA
SCREEN	MIRROR
OPTION	LANGUAGE
WIRELESS	12
: SELECT

	MAIN Menu								Example : MAIN Menu
	MAIN Menu								(BRIGHT)
	Item							Description
	BRIGHT	Adjust Brightness: Light					⇔	Dark
	CONTRAST	Adjust Contrast: Strong					⇔	Weak
		Select Aspect Ratio:
		At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO
		Input:
	ASPECT	4:3	⇔	16:9
		At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:
		4:3	⇔	16:9	⇔	SMALL
		• The SMALL picture may not be displayed correctly with certain input signals.
	PICT.POSIT.	Select Picture Position (for 16:9/SMALL Picture):
	PICT.POSIT.	TOP ⇔ CENTER ⇔ BOTTOM
		TOP ⇔ CENTER ⇔ BOTTOM
	GAMMA	Select Gamma Mode:
	GAMMA	NORMAL		⇔	CINEMA		⇔	DYNAMIC
		NORMAL		⇔	CINEMA		⇔	DYNAMIC
	MIRROR	Select Mirror Status:
	MIRROR	NORMAL		⇔	H:INVERT		⇔	V:INVERT ⇔	H&V:INVERT
		NORMAL		⇔	H:INVERT		⇔	V:INVERT ⇔	H&V:INVERT
		Select Menu Language:
	LANGUAGE	ENGLISH		⇔	FRANÇAIS			⇔ DEUTSCH	⇔ ESPAÑOL ⇔
	LANGUAGE	ITALIANO		⇔ NORSK ⇔ NEDERLANDS ⇔ 日本語 ⇔
		ITALIANO		⇔ NORSK ⇔ NEDERLANDS ⇔ 日本語 ⇔
		POTUGUÊS ⇔			中文	⇔

2

Image 41

Contents Model 28A8247 Page Page Page Page Page Page Page Contents RGB cable Video/Audio cable Vol.1/Vol.2 Safety Instructions Projector FeaturesSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapDevices you will be using to the projector Only use the power cord that came with the projectorProjector Part NamesRemote Control Adjusting the Projectors Elevator Feet Setting UP the ProjectorPress and hold in the elevator Buttons Turn the elevator screw to fine tuneTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Putting batteries into the remote control unit Using the Remote ControlRemove the battery cover Close the battery coverOperating the remote control Using the Remote ControlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Press the Volume button Adjusting the VolumeUse the lever switch / to adjust the volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureWas begun When BNC RGB is selected Adjusting Screen with ONE-TOUCHPress the ONE Touch button You can activate the following functions just byTemporarily Blanking the Screen Selecting the Aspect RatioPress the Aspect button Press the Blank buttonPress the Menu button Using the Menu FunctionsUse the lever switch To adjust the level Operating the PC Screen Available Functions Remote Control OperationDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterOther Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Item selectionPICTURE-2 Menu PICTURE-1 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuBlank Start UPOption Menu Wireless MenuOption Menu IR RemoteNo Input is Detected Related MessagesSync is OUT of Range Check the AIR FlowPower Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 PhenomenonDimension Diagram SpecificationsSpecification Unit mmSub 15-pin Shrink Signal Connector PIN AssignmentSignal Terminal Specification Resolution FH kHz FV Hz Rating Signal mode Display Example of Computer SignalInitial SET Signals ADB Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolRS-232C Communication 日本語 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Legal Information Audio Visual Products