Dukane 8055 user manual Safety Precautions

Page 49

Safety Precautions (continued)

WARNING

Be cautious of High temperatures of the projector.

High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present.

Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn. Take care of ventilation.

• Keep a space of 30 cm or more between the sides and other objects such as walls.

•Do not place the projector on a metallic table or anything weak in heat.

•Do not place anything about the lens, air fans and ventilation openings of the projector.

•Do not use with the ventilation opening facing downwards.

•Never block the air fan and ventilation openings.

•Do not cover the projector with a tablecloth, etc.

•Do not place the projector on a carpet or bedding.

Never look through the lens or openings when the lamp is on.

The powerful light could adversely affect vision.

Use special caution in households where children are present.

Use only the correct power cord and the correct power outlet.

Incorrect power supply could result in fire or electrical shock.

•Use only the correct power outlet depending on the indication on the projector and the safety standard.

•The enclosed power cord must be used depending on the power outlet to be used.

Be cautious of the power cord connection.

Incorrect connection of the power cord could result in fire or electrical shock.

• Do not touch the power cord with a wet hand.

• Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug.

•Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.

Be sure to connect with ground wire.

 

Connect the ground terminal of AC inlet of this unit with the ground

 

terminal provided at the building using the correct power cord; otherwise,

 

fire or electric shock can result.

Surely connect

• Don’t take the core of power cord away.

the ground wire.

 

3

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Model Page Projector 8055Contents Projector Features Projector Part NamesFastening The Lens Cap Projector Input button Power indicator Temp indicatorRemote Control Arrangement Setting UpAdjust the height of the projector by Adjusting The Projectors ElevatorAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices AUDIO-L AUDIO-R G B R Connecting to a computerFirmly plug the power cord’s plug Into the outlet Connecting Power SupplyRemove Battery cover Remote ControlClose Battery cover Putting BatteriesOperating The Remote Control Turning On The Power Power ON/OFFWhen the lens cap is attached, remove Set the power switch to onSelecting An Input Signal Switch the power switch to O OFF Turning Off The PowerPower switch OFF position Attached the lens capOperating Adjusting The VolumeTemporarily Muting The Sound Use Buttons to adjust Position Adjusting The PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeatureUse Buttons to adjust the zoom Level Using The Magnify FeatureFreezing The Screen Press the Magnify on buttonSelecting The Aspect Ratio Signal SearchingTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu Reset the PICTURE-1 Menu Items Load/Save a SettingPicture 1 Menu LOAD4Picture 2 Menu PhasePosition SizeColor Space Input MenuVideo Frame LockVideo NR Input MenuInformation S2-ASPECTAuto Menu AdjustSearch Start UP Screen MenuMessage Screen Type Option MenuLamp Time Operating The PC Screen Available Functions Remote Control OperationUSB Mouse/Keyboard Control Lamp Replacing The Lamp Caring For The Air Filter Air FilterNew air filter. Tell the dealer your air Replacing The Air FilterHold the release buttons of the air Filter, while pulling down itOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Power Lamp Temp Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceSpecification SpecificationsAbout The Symbols Safety Precautions Safety Precautions Be careful in handling the light source lamp Be careful in moving the projector Do not give the remote control any physical impact Take care not to fatigue your eyes Lamp Regulatory Notices Page Technical Page Resolution FH kHz FV Hz Rating Signal mode Display Example Of Computer SignalText Initial Set Signals Communications Setting Connecting The CableConnection To The Mouse Control RS-232C CommunicationChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command4A D2 Command Data Chart日本語 Be EF FE D7 Be EF EC D9 Auto RGB Be EF FB D8 Mute Turn OFF Be EF Dukane Corporation Audio Visual Products

8055 specifications

The Dukane 8055 is an advanced ultrasonic welding machine designed to deliver exceptional performance for various manufacturing applications. Known for its precision and reliability, the Dukane 8055 is ideal for industries such as automotive, medical, and electronics, where high-quality joining processes are crucial.

One of the standout features of the Dukane 8055 is its robust ultrasonic technology. It employs high-frequency sound waves to create localized heating at the joint interface of thermoplastic materials. This method significantly reduces cycle times, improving productivity while ensuring consistent weld quality. The 8055 offers an adjustable frequency capability, allowing operators to optimize the welding process based on the specific materials being used.

The machine's user-friendly interface includes a touchscreen control panel, making it easy to set parameters and monitor the welding process in real time. This feature enhances operational efficiency by enabling quick adjustments to be made on the fly, ensuring that production runs smoothly.

Another significant characteristic of the Dukane 8055 is its integration with advanced software systems. The machine comes equipped with data logging capabilities, allowing users to track and analyze performance metrics. This data can be instrumental in identifying trends, ensuring compliance with industry standards, and implementing continuous improvement initiatives.

The Dukane 8055 also prioritizes safety and reliability. It is designed with various safety features, including automatic shutdown in case of abnormalities, ensuring minimal risk to operators and equipment. The robust construction of the machine ensures longevity even under demanding production environments.

Additionally, the Dukane 8055 is versatile, capable of accommodating various welding tools and accessories. This flexibility allows manufacturers to easily switch between different applications, from complex assembly tasks to simple joining processes, making it a valuable asset to any production line.

In summary, the Dukane 8055 ultrasonic welding machine stands out with its advanced technology, user-friendly controls, data logging features, and robust design. Its ability to adapt to various applications while ensuring high-quality results makes it an exemplary choice for manufacturers seeking efficiency and reliability in their joining processes. With the Dukane 8055, companies can enhance their production capabilities while maintaining the highest standards of quality.
Top Page Image Contents