Dukane 8055 user manual Option Menu, Screen Type, Lamp Time

Page 33

Multifunctional Settings (continued)

OPTION Menu

With the OPTION menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below.

MENU

MAIN

VOLUME

16

PICTURE-1

SCREEN TYPE

4:3

PICTURE-2

LAMP TIME

1234h

INPUT

FILTER TIME

21h

AUTO

RESET

 

SCREEN

 

 

OPTION

 

 

: SELECT

Item

 

 

 

 

Description

 

 

 

 

 

 

 

 

 

VOLUME

Adjust Volume: High

⇔

 

Low

 

 

 

 

 

 

 

 

 

 

Select the Screen Type:

 

 

 

 

 

 

4:3

⇔

16:9

 

⇔

16:9

⇔

16-9

SCREEN TYPE

• Please select the screen type used and the picture position in case of 16:9.

 

This selection is used as basic information for a suitable display. This function

 

should be performed before other picture adjustment.

 

 

 

 

 

 

To begin the operation of this item, please press the

button of the

 

projector or the RESET button of the remote control for 3 seconds.

 

Reset the Lamp Timer:

 

 

 

 

 

 

Selecting the RESET performs this function.

 

 

 

RESET

⇒

CANCEL

 

 

 

 

 

•The numerical value of four digits shown on this menu is the projector use time since the last RESET operation of this item. The value is reset to 0 at the

LAMP TIME

same time the RESET is selected.

•The value of this function is used to display the message of “CHANGE THE LAMP”. So this function must be performed only immediately after replacing the lamp.

Do not perform this function unless you have replaced the lamp. Perform this function every time the lamp is replaced. Incorrect performing of this function causes incorrect operation of the message function.

•Please see to the section “Lamp” about replacing the lamp.

To begin the operation of this item, please press the button of the projector or the RESET button of the remote control for 3 seconds.

Reset the Filter Timer:

Selecting the RESET performs this function.

RESET

⇒ CANCEL

•The numerical value of four digits shown on this menu is the projector use time since the last RESET operation of this item. The value is reset to 0 at the same time the RESET is selected.

FILTER TIME • The value of this function is used to display the message of “CLEAN THE AIR FILTER”. So this function must be performed only immediately after cleaning or replacing the air filter.

Do not perform this function unless you have cleaned or replaced the air filter. Perform this function every time the air filter is cleaned or replaced. Incorrect performing of this function causes incorrect operation of the message function.

•Please see to the section “Air Filter” about cleaning and replacing the air filter.

 

Reset the OPTION Menu Items:

 

Selecting the EXECUTE performs this function.

RESET

EXECUTE

⇒ CANCEL

•The SCREEN TYPE item is returned to the initial setting. Note that the items VOLUME, LAMP TIME and FILTER TIME are not reset.

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Model Page Projector 8055Contents Projector Features Part Names ProjectorFastening The Lens Cap Projector Input button Power indicator Temp indicatorRemote Control Arrangement Setting UpAdjust the height of the projector by Adjusting The Projectors ElevatorAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices AUDIO-L AUDIO-R G B R Connecting to a computerFirmly plug the power cord’s plug Into the outlet Connecting Power SupplyRemove Battery cover Remote ControlClose Battery cover Putting BatteriesOperating The Remote Control Turning On The Power Power ON/OFFWhen the lens cap is attached, remove Set the power switch to onSelecting An Input Signal Switch the power switch to O OFF Turning Off The PowerPower switch OFF position Attached the lens capAdjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeatureUse Buttons to adjust the zoom Level Using The Magnify FeatureFreezing The Screen Press the Magnify on buttonSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu Reset the PICTURE-1 Menu Items Load/Save a SettingPicture 1 Menu LOAD4Picture 2 Menu PhasePosition SizeColor Space Input MenuVideo Frame LockVideo NR Input MenuInformation S2-ASPECTAdjust Auto MenuSearch Screen Menu Start UPMessage Option Menu Screen TypeLamp Time Available Functions Remote Control Operation Operating The PC ScreenUSB Mouse/Keyboard Control Lamp Replacing The Lamp Caring For The Air Filter Air FilterNew air filter. Tell the dealer your air Replacing The Air FilterHold the release buttons of the air Filter, while pulling down itOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Power Lamp Temp Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceSpecification SpecificationsAbout The Symbols Safety Precautions Safety Precautions Be careful in handling the light source lamp Be careful in moving the projector Do not give the remote control any physical impact Take care not to fatigue your eyes Lamp Regulatory Notices Page Technical Page Example Of Computer Signal Resolution FH kHz FV Hz Rating Signal mode DisplayText Initial Set Signals Communications Setting Connecting The CableConnection To The Mouse Control RS-232C CommunicationChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment command4A D2 Command Data Chart日本語 Be EF FE D7 Be EF EC D9 Auto RGB Be EF FB D8 Mute Turn OFF Be EF Dukane Corporation Audio Visual Products

8055 specifications

The Dukane 8055 is an advanced ultrasonic welding machine designed to deliver exceptional performance for various manufacturing applications. Known for its precision and reliability, the Dukane 8055 is ideal for industries such as automotive, medical, and electronics, where high-quality joining processes are crucial.

One of the standout features of the Dukane 8055 is its robust ultrasonic technology. It employs high-frequency sound waves to create localized heating at the joint interface of thermoplastic materials. This method significantly reduces cycle times, improving productivity while ensuring consistent weld quality. The 8055 offers an adjustable frequency capability, allowing operators to optimize the welding process based on the specific materials being used.

The machine's user-friendly interface includes a touchscreen control panel, making it easy to set parameters and monitor the welding process in real time. This feature enhances operational efficiency by enabling quick adjustments to be made on the fly, ensuring that production runs smoothly.

Another significant characteristic of the Dukane 8055 is its integration with advanced software systems. The machine comes equipped with data logging capabilities, allowing users to track and analyze performance metrics. This data can be instrumental in identifying trends, ensuring compliance with industry standards, and implementing continuous improvement initiatives.

The Dukane 8055 also prioritizes safety and reliability. It is designed with various safety features, including automatic shutdown in case of abnormalities, ensuring minimal risk to operators and equipment. The robust construction of the machine ensures longevity even under demanding production environments.

Additionally, the Dukane 8055 is versatile, capable of accommodating various welding tools and accessories. This flexibility allows manufacturers to easily switch between different applications, from complex assembly tasks to simple joining processes, making it a valuable asset to any production line.

In summary, the Dukane 8055 ultrasonic welding machine stands out with its advanced technology, user-friendly controls, data logging features, and robust design. Its ability to adapt to various applications while ensuring high-quality results makes it an exemplary choice for manufacturers seeking efficiency and reliability in their joining processes. With the Dukane 8055, companies can enhance their production capabilities while maintaining the highest standards of quality.
Top Page Image Contents