Zooming

10. Operation (continued)

Selecting an aspect ratio

Each time you press the ASPECT button on the remote control, it switches the aspect ratio of the image, in turn.

Use the D-ZOOM + and D-ZOOM – buttons on the remote control to adjust the screen size.

Adjusting the picture position

After pressing the POSITION button on the remote control, use the ▲, ▼, ◄ and

►buttons. Press the POSITION button again to finish this operation.

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY	FREEZE		VOLUME
ON			＋
OFF			ー
KEYSTONE	MY BUTTON		MUTE
	1		2
- FOCUS +		- D-ZOOM +

POSITIONMENU

ENTER

ESCRESET

ASPECT button

VOLUME+/- button

KEYSTONE button

MUTE button D-ZOOM + button

D-ZOOM – button

POSITION button

Correcting distortion

Press the KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion.

Use the ▲/▼ cursor buttons to select, MANUAL or PERFECT FIT operation, and press the ► button to perform the following.

MANUAL displays a dialog for keystone correction.

PERFECT FIT displays a dialog for adjusting the shape of the projected image in each of the corners and sides.

Use the cursor buttons according to the dialog, checking the image. Press the KEYSTONE button again to finish this operation.

Adjusting the volume

Use the VOLUME +/- buttons to adjust the volume.

Muting the sound

Press the MUTE button on the remote control. To restore the sound, press the MUTE or VOLUME+/- button.

NOTE

•For details, see the Operating Guide in the CD.

CATION

■ If you wish to have a blank screen while the projector's lamp is on, use the BLANK function. (See the “Operating Guide” in the CD.) Any other method of blocking the projection light, such as attaching something to the lens or placing something in front of the lens, may cause the damage to the projector.