3. Connecting with your devices
Before connecting them, make sure that the devices are suitable to connect with this projector, and prepare the required signal cables and adapters. Consult your dealer if the accessory that is not included in this product is required. Refer to the following for connection. If you want to use the cable cover, see the paragraph “6. Using the cable cover” (6) beforehand.
PCs
RGB OUT | AUDIO | RGB OUT | AUDIO | |
|
| OUT |
| OUT |
Monitor | RGB IN | MONITOR OUT |
| ||
|
| CONTROL |
COMPUTER IN2
Y CB/PB CR/PR
VIDEO | L | R |
AUDIO IN3
|
| AUDIO IN |
1 |
| Speakers |
COMPUTER IN1 |
|
|
AUDIO | (with an amplifier) | |
OUT |
| |
2 |
|
|
AUDIO IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Y | CB/PB CR/PR |
|
|
| L | R |
| VIDEO |
| L |
| R |
|
|
|
|
|
|
| L | R | ||
|
|
|
|
|
|
|
| ||||||||||||||||
COMPONENT VIDEO OUT |
|
| AUDIO OUT |
| OUT |
| AUDIO OUT |
|
|
| OUT |
| AUDIO OUT | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WARNING
■Use only the accessories contained in this product or recommended by your dealer. Do not modify the projector or accessories.
■For the cable with a ferrite core only at one end, connect the end with the core to
the projector. The cables may be required a specific length or a ferrite core by the regulations.
■Be careful not to damage the cables. Route the cables so that they are not likely to be walked on or pinched by items placed upon or against them.
CAUTION
■Do not connect or disconnect the projector with devices while they are connected to a power supply, except for the cases directed by the manuals.
■Be careful not to set a connector into a wrong port or with a wrong way.
4