Dukane 8103H user manual Connecting with a power supply

Page 6

4. Connecting with a power supply

Before connection, confirm that the power outlet

is suitable for this projector and the power cord.AC Inlet Then follow the procedure below for connection.

ENGLISH

1. Insert the end of the power cord with the socket into the AC inlet of the projector.

2. Plug the other end of the power cord into a power outlet.

Power cord (with the socket)

WARNING

Be careful of operation for a power supply not to cause an electric shock or a fire.

• Do not handle the power cord with the wet hand.

• Use this product with only the type of power supply indicated on the projector.

• Use a power outlet that is close to the projector and easily accessible.

• Connect firmly the power cord not to result in loose connection. Do not use a loose or unsound power outlet.

• Do not overload the outlet, since overloading can result in a risk of fire or electric shock.

• Use only the power cord contained in this product unless it is damaged. If it is damaged, consult your dealer to get new one. Do not modify the power cord.

5

Image 6
Contents Data Video Projector User’s Manual Concise Contents 8103HChecking the contents ArrangementTable for 43 screen Connecting with your devices SpeakersConnecting with a power supply Using the security bar and slot Using the cable coverPreparing for the remote control Starting the projector Adjusting the projection position OperationZooming Turning the projector off Replacing the lamp High Voltage Temperature Maintaining the air-filter Caring for the mirror and lens Using the CD manual System requirementsRegulatory notices About Electro-Magnetic InterferenceWarranty and after-service Trademark AcknowledgmentSpecifications