Canon LV-S2 owner manual To the Owner

Page 2

TO THE OWNER

Before operating this projector, read this manual thoroughly to operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “TROUBLESHOOTING” section in the end at this manual. If the problem still persists, contact the sales dealer where you purchased the projector or the service center.

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as it could possibly damage your eyes. Be especially careful that children do not stare directly into the beam.

This projector should be set in the way indicated. If not, it may result in a fire hazard.

Take appropriate space on the top, sides and rear of the projector

 

SIDE and TOP

 

REAR

 

cabinet for allowing air circulation and cooling the projector. 20cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Minimum clearance must be maintained. If the projector is to be

 

 

 

 

 

 

 

 

 

 

built into a compartment or similarly enclosed, the minimum

 

 

 

 

 

 

 

 

distances must be maintained. Do not cover the ventilation slot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on the projector. Heat build-up can reduce the service life of your

 

50cm

 

50cm

 

 

50cm

 

 

 

 

 

 

projector, and can also be dangerous.

 

 

 

 

 

 

 

 

Do not put any flammable objects or spray cans near the projector, hot air is exhausted from the ventilation holes.

If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

2

Image 2
Contents LV-S2 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Wide Zoom LensHOT AIR Exhausted PreparationNomenchtor For Continental Europe SETTING-UP the ProjectorConnecting AC Power Cord Room Light Adjustable FeetPreparation Positioning the Projector Preparation Mounting the Lens Cover Moving the ProjectorVideo Connecting the ProjectorTerminals of the Projector AV AudioConnecting to a Computer Terminals ProjectorConnecting Video Equipment Audio OUTOperation of the Remote Control Unit Before OperationBefore Operation Operating Range Remote Control Unit Battery InstallationBattery TOP Controls and Indicators Ready IndicatorFlow of ON-SCREEN Menu Operation HOW to Operate the ON-SCREEN MenuOperating the ON-SCREEN Menu Before Operation Menu BAR Guide WindowTurning on the Projector Basic OperationTurning on / OFF the Projector Turning OFF the ProjectorFocus Adjustment Adjusting the ScreenZoom Adjustment Keystone AdjustmentBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationSelecting the Computer System Computer InputSelecting the Input Source Select the Computer System ManuallyFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Menu Picture Image AdjustmentImage Level Select Direct Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoAV System Menu Video or S-VIDEO Selecting the Video SystemAuto AV System Menu Component VideoCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Menu SettingSetting Menu Remote control To change the code of the Remote Control UnitPower management Lamp counter resetLamp Replace Lamp ReplacementAppendix Lamp Handling Precautions Appendix Lamp Replace CounterCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning RecommendationTroubleshooting Remote Control Unit Does not workTechnical Specifications Optional PartsUSB Connector Series B Appendix Configurations of the TerminalsControl Port Connector Computer Input Terminal AnalogCanon U.S.A., INC
Related manuals
Manual 44 pages 61 Kb