Canon LV-S2 owner manual Setting Menu

SETTING

SETTING MENU

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT button(s) to move the
	red frame to the SETTING icon.

SETTING MENU

2	Press the POINT DOWN button to move the red frame to the
	item that you want to set and then press the SET button. The

Setting dialog box appears.

Language

The Language used in the ON-SCREEN MENU is selectable from English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Chinese, Korean, and Japanese.

Keystone

When the image is distorted vertically, select Keystone. The ON- SCREEN MENU disappears and the Keystone dialog box is displayed. Correct the keystone distortion by pressing the POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20.

Blue back

When this function is “On,” the projector produces a blue image while the input signal is not detected.

Display

This function decides whether to display the On-Screen Displays. On ··· shows all the On-Screen Displays.

Off ···· sets On-Screen Displays disappeared except;

Set the red frame to the item and press the SET button.

SETTING Menu icon

When pressing the SET button at Language, Language Menu appears.

●ON-SCREEN MENU

●“Power off?” message (P19)

●P-TIMER

●“No signal” message (P36)

●“Wait a moment!” message

Logo

When this function is “On,” the projector displays the Canon logo when starting up.

Ceiling

When this function is “On,” the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounted projector.

Rear

When this function is “On,” picture is left / right reversed. This function is used to project the image to a rear projection screen.

Move the red frame to the item and then press the

POINT LEFT/RIGHT button(s).

Ceiling function

Rear function

35