Canon LV-S2 Maintenance, AIR Filter Care and Cleaning, Cleaning Projection Lens, Recommendation

Page 39
Clean the Air Filters with a brush or wash out dust and particles.

MAINTENANCE

WARNING TEMP. INDICATOR

The WARNING TEMP. Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. This Indicator stops flashing when the temperature of the projector returns to normal.

When the WARNING TEMP. Indicator continues to flash, check the items listed below.

1

The Ventilation Slots of the projector may be blocked. In such an event, reposition the projector so that the Ventilation

Slots are not obstructed.

2

The Air Filter may be clogged with dust particles. Clean the Air Filter by following section AIR FILTER CARE AND

CLEANING below.

3

If the WARNING TEMP. Indicator remains on after performing the above checks, the Cooling Fans or the Internal

Circuits may be malfunctioning. Contact service personnel from an authorized dealer or a service station.

AIR FILTER CARE AND CLEANING

The Removable Air Filter prevents dust from accumulating on the surface of the Projection Lens and the Projection Mirror. Should the Air Filter become clogged with dust particles, it will reduce Cooling Fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean Air Filter following the steps below:

1

Turn off the projector, and disconnect the AC power cord from

AIR FILTER(Small)

the AC outlet.

 

2

Turn the projector upside down and remove the two Air Filters

 

(Large and Small) by pulling the latches upward.

 

3

4 Replace each Air Filter properly. Make sure that the Air Filters are fully inserted.

CAUTION

 

Do not operate the projector with the Air Filter removed.

 

Dust may accumulate on the LCD Panel and the Projection

 

Mirror, therefore degrading picture quality.

AIR FILTER(Large)

Do not put small parts into Air Intake Vents. It may result in

 

malfunction of the projector.

 

RECOMMENDATION

We recommend avoiding dusty/smoky environment when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on the lens, liquid crystal panels, or optical elements inside the projector. This condition may degrade the quality of a projected image.

When the above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

CLEANING PROJECTION LENS

Follow these steps to clean the Projection Lens:

1

Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.

Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.

2

3

Lightly wipe a cleaning cloth over Projection Lens.

When the projector is not in use, attach Lens Cover.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents LV-S2 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Wide Zoom Lens Features and DesignPreparation NomenchtorHOT AIR Exhausted SETTING-UP the Projector Connecting AC Power CordFor Continental Europe Adjustable Feet Preparation Positioning the ProjectorRoom Light Moving the Projector Preparation Mounting the Lens CoverAV Audio Connecting the ProjectorTerminals of the Projector VideoTerminals Projector Connecting to a ComputerAudio OUT Connecting Video EquipmentBefore Operation Operation of the Remote Control UnitRemote Control Unit Battery Installation BatteryBefore Operation Operating Range Ready Indicator TOP Controls and IndicatorsHOW to Operate the ON-SCREEN Menu Operating the ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning OFF the Projector Basic OperationTurning on / OFF the Projector Turning on the ProjectorKeystone Adjustment Adjusting the ScreenZoom Adjustment Focus AdjustmentDirect Operation Sound AdjustmentTimer Function Basic Operation No Show FunctionSelect the Computer System Manually Computer InputSelecting the Input Source Selecting the Computer SystemKHz Computer Input Compatible Computer SpecificationsResolution FreqAuto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area Display area HFull screen Image Select Menu Picture Image AdjustmentImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputAV System Menu Component Video Selecting the Video SystemAuto AV System Menu Video or S-VIDEOCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Setting MenuSetting Menu Lamp counter reset To change the code of the Remote Control UnitPower management Remote controlLamp Replacement AppendixLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsRecommendation MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensTroubleshooting Does not work Remote Control UnitOptional Parts Technical SpecificationsComputer Input Terminal Analog Appendix Configurations of the TerminalsControl Port Connector USB Connector Series BCanon U.S.A., INC
Related manuals
Manual 44 pages 61 Kb

LV-S2 specifications

The Canon LV-S2 is a versatile and portable multimedia projector that caters to both professional and educational environments. This powerful device is designed to deliver bright and vibrant images, making it ideal for presentations, lectures, and even home entertainment.

One of the standout features of the Canon LV-S2 is its impressive brightness level, rated at 3000 lumens. This high brightness allows the projector to perform well in various lighting conditions, ensuring that images remain clear and visible even in well-lit rooms. This makes it an excellent choice for classrooms and conference rooms where ambient light may be present.

Another notable characteristic of the LV-S2 is its native SVGA resolution of 800 x 600 pixels. While this resolution may seem modest compared to some higher-end models, it is sufficient for displaying standard definition content and is compatible with various formats, ensuring that users can easily connect it to different devices.

The LV-S2 employs DLP (Digital Light Processing) technology, which is known for its reliability and color accuracy. DLP projectors tend to produce sharper images with better contrast compared to traditional LCD models. This technology also minimizes the risk of color degradation over time, providing long-lasting performance without compromising on image quality.

Portability is another key feature of the LV-S2. Weighing in at just 2.3 kg, it is easy to transport, making it a great option for mobile professionals or educators who need to set up presentations in different locations. The compact design allows it to fit easily into a laptop bag, enabling users to take it wherever their work requires.

Connectivity options are abundant with the LV-S2. It includes HDMI, VGA, and composite video inputs, allowing for seamless connections to a variety of devices such as laptops, DVD players, and gaming consoles. This versatility ensures that users can quickly switch between different media sources without hassle.

In terms of lamp life, the LV-S2 boasts an impressive lifespan of up to 6000 hours in eco mode. This extended lamp life significantly reduces maintenance costs, ensuring that users can enjoy uninterrupted service for extended periods without the worry of frequent bulb replacements.

In summary, the Canon LV-S2 is an excellent choice for those in need of a reliable, portable, and high-quality projector. Its bright output, solid resolution, DLP technology, and extensive connectivity options make it a valuable tool for various applications, ensuring that users can deliver effective and engaging presentations wherever they go.
Top Page Image Contents