Peavey 158, 110, 112, 115 owner manual MAX Series Specifications

Page 11

MAX® Series Specifications

MAX 158

Rated Power:

15 watts RMS into 4 ohms, nominal @ 1 kHz, 120 VAC line

Power Consumption:

(Domestic)

50 watts, 60 Hz, 120 VAC

(Export)

50 watts, 50/60 Hz, 230 VAC

MAX 110

The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing:

Input Sensitivity:

Nominal Input Level (Modern):

-12.4 dBV‚ 240 mV RMS

Maximum Input Level:

6.0 dBV‚ 2.0 V RMS

Tape/CD Input:

Impedance: High-Z, 1Meg ohms Nominal Input Level:

5.60 dBV‚ 1.90 V RMS

Headphone Output:

Nominal Output Level: 75 mW into 8 ohms

(Disconnects internal speaker when used)

System Hum & Noise @ Nominal Input Level:

(Clean channel‚ 20 Hz to 20 kHz unweighted)

Greater than 78 dB below rated power

Dimensions (H x W x D):

14.375" x 12.563" x 8.875" (366 mm x 320 mm x 226 mm)

Weight:

17.5 lbs. (7.94 kg)

Rated Power:

20 watts RMS into 4 ohms, nominal @ 1 kHz, 120 VAC line

Power Consumption:

(Domestic)

50 watts, 60 Hz, 120 VAC

(Export)

50 watts, 50/60 Hz, 230 VAC

The following specs are measured at 1 kHz with all controls preset at 5; "Modern" voicing:

Input Sensitivity:

Nominal Input Level (Modern):

-15.4 dBV‚ 170 mV RMS

Maximum Input Level:

7.04 dBV‚ 2.25 V RMS

Tape/CD Input:

Impedance: High-Z, 1.1Meg ohms Nominal Input Level:

8.79 dBV‚ 2.75 V RMS

Headphone Output:

Nominal Output Level: 100 mW into 8 ohms

(Disconnects internal speaker when used)

System Hum & Noise @

Nominal Input Level:

(Clean channel‚ 20 Hz to 20 kHz unweighted)

Greater than 73 dB below rated power

Dimensions (H x W x D):

17.653" x 15.375" x 11.188" (449 mm x 391 mm x 285 mm)

Weight:

25.4 lbs. (11.5 kg)

11

Image 11
Contents Page Page Important Safety Instructions Bewahren SIE Diese Sicherheitshinweise AUF Gardez CES Instructions Guarde Estas Instrucciones Bass Amplifiers EnglishEqualization Input JackGain VoicingHeadphone Input RCA CD/Line In jacks MAX 158 and 110 onlyPost-EQ EFX Loop MAX 112 and 115 only IEC Mains Connector Master Volume MAX 115 onlyPower Switch MAX Series Specifications Effects Loop Bassverstärker DeutschEqualizer VorderseiteEingangsklinke Kopfhörereingang Cinch-CD/Line-In-Klinken nur MAX 158 undPost-EQ-Effektschleife nur MAX 112 und IEC-Netzstecker Master Volume nur MAXPower-Schalter RückseiteMAX Series Technische Daten Effektschleife Amplificateurs pour basse FrançaisEgalisation Paneau AvantJack d’entrée Réglage du style de tonalités VoicingEntrée Casque RCA CD/Jacks en ligne MAX 158 et 110 uniquementBoucle Post-EQ EFX MAX 112 et 115 seulement Connecteur IEC Volume Master MAX 115 seulementPanneau Arriere Intérrupteur d’alimentationPuissance mesurée Boucle d’effet Amplificadores para Bajo EspañolVoicing Timbre Panel FrontalJack de entrada GananciaSalida de auriculares Jacks RCA de entrada CD/Line sólo en MAX 158 yLoop de EFX Post-EQ sólo en MAX 112 y Conector Principal IEC Volumen General sólo en MAXPanel Trasero Interruptor de encendidoMAX Series Especificaciones Loop de efectos Peavey Electronics Corporation Limited Warranty EX000014
Related manuals
Manual 11 pages 11.34 Kb Manual 16 pages 59.3 Kb

158, 110, 112, 115, 112 specifications

The Peavey 112 is a versatile and powerful guitar amplifier that caters to musicians seeking high-quality sound in a portable package. Designed for both practice and performance, the Peavey 112 excels in producing a wide range of tones suited for various genres, from rock to jazz.

One of the standout features of the Peavey 112 is its compact design, which makes it ideal for transport. With a weight of approximately 30 pounds, it is lightweight yet sturdy, allowing musicians to easily take it to gigs or rehearsals without any hassle. The amplifier comes equipped with a single 12-inch speaker, which delivers a full-bodied sound while maintaining clarity and definition across the frequency spectrum.

The Peavey 112 utilizes advanced technology to enhance its sound output. It incorporates Peavey’s proprietary TransTube technology, which emulates the warmth and responsiveness of a tube amplifier. This technology helps to produce rich harmonic overtones and a dynamic response that guitarists crave, providing an authentic amp feel whether practicing at home or performing live.

In terms of features, the Peavey 112 offers multiple channels, including a clean channel for pristine sound and an overdrive channel that allows for a more aggressive tone. The amp is equipped with EQ controls, including bass, middle, and treble, enabling musicians to sculpt their sound to their specific needs. Additionally, the inclusion of reverb adds depth to the overall sound, perfect for enhancing solos or creating atmospheric textures.

Another significant characteristic of the Peavey 112 is its built-in effects loop, which offers flexibility when integrating external effects pedals into a rig. This feature is particularly useful for guitarists who rely on multiple effects to achieve their desired sound.

Durability is also a key focus with the Peavey 112. Constructed with rugged materials, it can withstand the rigors of transport and regular use without losing performance quality. The grille cloth and speaker are designed to endure, making it a reliable choice for musicians who are always on the move.

In conclusion, the Peavey 112 stands out as a reliable and powerful amplifier that combines advanced technology with practical features. Its lightweight design, versatile tonal options, and durability make it an excellent choice for guitarists looking for quality sound in a portable package. Whether practicing, recording, or performing on stage, the Peavey 112 is equipped to meet the demands of any musician.