Dell M109S manual Using the On-Screen Display, Auto-Adjust

Using the On-Screen Display

The projector has a multi-language On-Screen Display (OSD) that can be displayed with or without an input source present.

To navigate through the tabs in the Main Menu, press the or button on the control panel. To select a submenu, press the Enter button on the control panel.

To select an option, press the or button on the control panel. When an item is selected, the color changes to dark blue. Use the or button on the control panel to adjust the settings.

To go back to Main Menu, go to Back tab and press the Enter button on the control panel.

To exit the OSD, go to EXIT tab and press the Enter button or press the Menu button directly on the control panel.

Main Menu

AUTO-ADJUST

Auto Adjust automatically adjusts the projector's Frequency and Tracking in PC mode. While Auto Adjustment is in progress,

the following message appears on the screen, "Auto Adjustment in Progress...".

INPUT SOURCE

The Input Source menu allows you to select your projectors input source.

AUTO SOURCE—Select On (the default) to auto detect the available input signals. If you press the Source button when the projector is on, it automatically finds the next available input signal. Select Off to lock the current input signal. If you press the Source button

when the Auto Source mode is set to Off, you can manually select the input signal.

VGA—Press Enter to detect VGA signal.

COMPOSITE—Press Enter to detect Composite Video signal.

16

Using Your Projector