Dymo PRO 5000 Cleaning Your Printer, RhinoPRO Label Cassettes, Adjusting Print Quality Advanced

Page 10

To serialize your labels

1.Enter the text for your label.

2.Use the arrow keys to move the cursor under the letter or number to serialize.

3.Press SERIAL .

4.Enter the number of labels you wish to print and

press or Print to begin printing. Enter 1-99 for numbers and 1-26 for letters.

To print multiple copies of the same serialized label, choose + Print and enter the number of copies of each label to print. See Printing Multiple Copies on page 9.

Adjusting Print Quality (Advanced)

Depending on the label material you choose, you may need to lighten or darken the print on the label. Adjusting the print head temperature allows you to control the print quality (+/- 20).

To set the print head temperature

1.

Press +

 

.

SAVE

 

2.

Use the arrow keys to select the print head

 

temperature and press .

3.Repeat as necessary until you are satisfied with the print quality.

Cleaning Your Printer

Your printer is designed to give you long and trouble-free service, while requiring very little maintenance.

Clean your printer from time to time to keep it working properly. Clean the cutter blade each time you replace the tape cassette.

To clean the cutter blade

1.Remove the tape cassette.

2.Press and hold down the cutter lever to expose the cutter blade.

3.Use a cotton ball and alcohol to clean both sides of the blade.

4.Release the cutter lever.

To clean the print head

Clean the print head using the cleaning tool located inside the tape compartment lid.

RhinoPRO Label Cassettes

The following industrial label cassettes are available for the RhinoPRO 5000 printer.

Material Type

3/8”

1/2”

3/4”

Length

(9 mm)

(12 mm)

(19 mm)

 

 

Flexible Nylon

18488

18489

11.5’

White

(3.5 m)

Flexible Nylon

18490

18491

11.5’

Yellow

(3.5 m)

Permanent Polyester

18482

18483

18484

18.0’

White

(5.5 m)

 

 

 

Permanent Polyester

18485

18486

18487

18.0’

Metallic

(5.5 m)

 

 

 

10

Image 10
Contents User Guide RhinoPRO 5000 Printer About Your New Printer Warranty RegistrationPower Supply Getting StartedTo insert the tape cassette Selecting a LanguagePrinting Your First Label To select a languageGetting to Know Your Printer Designing Your Label Recalling the Label from Memory Using the Hot KeysSaving your Label Printing Wrap-Around Labels WrapPrinting Patch Panel Labels Ppanel Printing Fixed Length Labels FixedPrinting Terminal Block Labels Tblock Printing Options Adjusting Print Quality Advanced Cleaning Your PrinterRhinoPRO Label Cassettes Troubleshooting Documentation FeedbackRev 11/03