Dymo PRO 5000 manual About Your New Printer, Getting Started, Warranty Registration, Power Supply

Page 3

About Your New Printer

With your new DYMO RhinoPRO5000 printer, you can create a wide variety of high-quality, self- adhesive labels. You can choose to print your labels in many different sizes and styles. The printer uses RhinoPRO Industrial label cassettes in widths of 1/4” (6 mm), 3/8” (9 mm), 1/2” (12 mm), or 3/4” (19 mm). RhinoPRO label cassettes are also available in a wide range of materials.

Visit www.dymo.com/industrial for information on obtaining tapes and accessories for your printer.

Warranty Registration

Please complete the warranty registration card and return it to the appropriate customer service address within seven days. Visit www.dymo.com/ industrial for details.

Getting Started

Follow the instructions in this section to get started by printing your first label.

Power Supply

The printer can operate on AC or battery power. To save power, the printer will automatically turn off after five minutes of inactivity.

Inserting the Batteries

The printer uses six AA batteries.

To insert the batteries

1.Press the thumb latch on the bottom of the labelmaker to open the battery compartment door. See Figure 2.

Press thumb latch

Figure 2

2.Insert the batteries following the polarity markings (+ and –).

3.Close the compartment door.

Remove the batteries if the printer will not be used for a long period of time.

Connecting the AC Adapter

Connecting the AC adapter to the printer disconnects the batteries as a power source.

To connect the AC adapter

1.Plug the power adapter into the power connector on the top, left side of the printer.

Figure 3

2.Plug the other end of the power adapter into a power outlet.

Inserting the Tape Cassette

Your printer comes with one label tape cassette. Visit www.dymo.com/industrial for information about purchasing additional label cassettes.

3

Image 3
Contents User Guide RhinoPRO 5000 Printer Getting Started Warranty RegistrationPower Supply About Your New PrinterTo select a language Selecting a LanguagePrinting Your First Label To insert the tape cassetteGetting to Know Your Printer Designing Your Label Printing Wrap-Around Labels Wrap Using the Hot KeysSaving your Label Recalling the Label from MemoryPrinting Fixed Length Labels Fixed Printing Patch Panel Labels PpanelPrinting Terminal Block Labels Tblock Printing Options Cleaning Your Printer Adjusting Print Quality AdvancedRhinoPRO Label Cassettes Documentation Feedback TroubleshootingRev 11/03