Delta Electronics warranty Engineering Data, Model DRP024V060W1BA

Switch Mode Power Supply DRP024V060W1BA

Engineering Data

∙Derating Curve (Both of Horizontal and Vertical)

o	Model: DRP024V060W1BA
		110%
		100%
	(%)	90%
		80%
	Load
		70%
	of Max
		60%
		50%
	Percentage
		40%
		30%
		20%
		10%
		0%
		-20	-10	0	10 20 30 40 50 60 70 80
					Ambient Temperature (C)

Note:

1.Do not use the device in areas outside of the shaded portion shown in the above graph. Internal parts may gradually deteriorate and become damaged.

2.Based on the above graph, if the ambient temperature is greater than 50°C, the output capacity has to be reduced by 2.5% per Celsius temperature increase. If not, the device

will go into over-temperature protection by switching off i.e. device will go into bouncing mode. It will

recover when ambient temperature drops to 50°C or output capacity is reduced as recommended in the graph.

3.If the device has to be mounted in any other direction, please contact your service provider for more details.

4.In order for the device to function in the manner intended, it is also necessary to observe a lateral spacing of 2cm from other equipments.

5.Depending on the ambient temperature and output capacity of the device, the device housing can be very hot!

6/13	Rev: 00,
1/10/2011