Delta Electronics Series E36SR manual Pick And Place Location, Recommended Pad Layout Smd

Contents OPTIONS DC/DC Power Modules 18~75V in, 5V/15A outDelphi Series E36SR, 75W Eighth Brick Family FEATURESDYNAMIC CHARACTERISTICS TECHNICAL SPECIFICATIONSINPUT CHARACTERISTICS OUTPUT CHARACTERISTICSELECTRICAL CHARACTERISTICS CURVES Figure 4 Turn-on transient at full rated load current CC mode tantalum capacitor and 1µF ceramic capacitor. Top Trace Vout current 25%-50% of Io, max di/dt = 0.1A/µs. Load cap 10µFFigure 12 Input reflected ripple current, is, through a 12µH Input Source Impedance Safety ConsiderationsSoldering and Cleaning Considerations DESIGN CONSIDERATIONSOver-Temperature Protection FEATURES DESCRIPTIONSOver-Current Protection Over-Voltage ProtectionRtrim − up = FEATURES DESCRIPTIONS CONOutput Voltage Adjustment TRIM Rtrim − down = 511Δ − 10.2KΩThermal Derating Thermal Testing SetupTHERMAL CONSIDERATIONS THERMAL CURVESSURFACE-MOUNT TAPE & REEL PICK AND PLACE LOCATIONRECOMMENDED PAD LAYOUT SMD Time LEADED Sn/Pb PROCESS RECOMMEND TEMP. PROFILELEAD FREE SAC PROCESS RECOMMEND TEMP. PROFILE TempName MECHANICAL DRAWINGSurface-mount module Through-hole moduleTHROUGH-HOLE MODULE MECHANICAL DRAWING WITH HEATSPREADERMODEL NAME PART NUMBERING SYSTEMMODEL LIST WARRANTY