Delta Electronics Series E36SR manual Mechanical Drawing With Heatspreader, Through-Hole Module

Page 14
MECHANICAL DRAWING (WITH HEATSPREADER)

MECHANICAL DRAWING (WITH HEATSPREADER)

THROUGH-HOLE MODULE

DS_E36SR05015_01042008

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents FEATURES DC/DC Power Modules 18~75V in, 5V/15A outDelphi Series E36SR, 75W Eighth Brick Family OPTIONSOUTPUT CHARACTERISTICS TECHNICAL SPECIFICATIONSINPUT CHARACTERISTICS DYNAMIC CHARACTERISTICSELECTRICAL CHARACTERISTICS CURVES Figure 4 Turn-on transient at full rated load current CC mode current 25%-50% of Io, max di/dt = 0.1A/µs. Load cap 10µF tantalum capacitor and 1µF ceramic capacitor. Top Trace VoutFigure 12 Input reflected ripple current, is, through a 12µH DESIGN CONSIDERATIONS Safety ConsiderationsSoldering and Cleaning Considerations Input Source ImpedanceOver-Voltage Protection FEATURES DESCRIPTIONSOver-Current Protection Over-Temperature ProtectionRtrim − down = 511Δ − 10.2KΩ FEATURES DESCRIPTIONS CONOutput Voltage Adjustment TRIM Rtrim − up =THERMAL CURVES Thermal Testing SetupTHERMAL CONSIDERATIONS Thermal DeratingSURFACE-MOUNT TAPE & REEL PICK AND PLACE LOCATIONRECOMMENDED PAD LAYOUT SMD Temp LEADED Sn/Pb PROCESS RECOMMEND TEMP. PROFILELEAD FREE SAC PROCESS RECOMMEND TEMP. PROFILE TimeThrough-hole module MECHANICAL DRAWINGSurface-mount module NameMECHANICAL DRAWING WITH HEATSPREADER THROUGH-HOLE MODULEWARRANTY PART NUMBERING SYSTEMMODEL LIST MODEL NAME
Top Page Image Contents