Delta Electronics Series E36SR manual Technical Specifications, Parameter, NOTES and CONDITIONS

TECHNICAL SPECIFICATIONS

(TA=25°C, airflow rate=300 LFM, Vin=48Vdc, nominal Vout unless otherwise noted.)

PARAMETER	NOTES and CONDITIONS	E36SR05015 (Standard)
		Min.	Typ.	Max.	Units
ABSOLUTE MAXIMUM RATINGS
Input Voltage
Continuous		18	24/48	75	Vdc
Transient (100ms)	100ms			100	Vdc
Operating Temperature	Refer to Figure 21 for measuring point	-40		122	°C
Storage Temperature		-55		125	°C
Input/Output Isolation Voltage				2250	Vdc
INPUT CHARACTERISTICS
Operating Input Voltage		18	24/48	75	Vdc
Input Under-Voltage Lockout
Turn-On Voltage Threshold		18	18.5	19	Vdc
Turn-Off Voltage Threshold		16.5	17	17.5	Vdc
Lockout Hysteresis Voltage		1	1.5	2	Vdc
Maximum Input Current	100% Load, 18Vin			5	A
No-Load Input Current	No load, 48Vin		70		mA
Off Converter Input Current			10	15	mA
Inrush Current(I2t)				1	A2s
Input Reflected-Ripple Current	P-P thru 12µH inductor, 5Hz to 20MHz		20		mA
Input Voltage Ripple Rejection	120 Hz		60		dB
OUTPUT CHARACTERISTICS
Output Voltage Set Point	Vin=48V, Io=Io.max, Tc=25°C	4.95	5.0	5.05	Vdc
Output Voltage Regulation
Over Load	Io=Io,min to Io,max		±5	±10	mV
Over Line	Vin=18V to 75V		±5	±10	mV
Over Temperature	Tc=-40°C to 85°C		±25	±50	mV
Total Output Voltage Range	over sample load, line and temperature	4.9		5.1	V
Output Voltage Ripple and Noise	5Hz to 20MHz bandwidth
Peak-to-Peak	Full Load, 1µF ceramic, 10µF tantalum		60		mV
RMS	Full Load, 1µF ceramic, 10µF tantalum		10	30	mV
Operating Output Current Range		0		15	A
Output DC Current-Limit Inception	Output Voltage 10% Low	110		140	%
DYNAMIC CHARACTERISTICS
Output Voltage Current Transient	48V, 10µF Tan & 1µF Ceramic load cap, 0.1A/µs
Positive Step Change in Output Current	25% Io.max to 50% Io.max		150		mV
Negative Step Change in Output Current	50% Io.max to 25% Io.max		150		mV
Settling Time (within 1% Vout nominal)			200		us
Turn-On Transient
Start-Up Time, From On/Off Control		2		20	ms
Start-Up Time, From Input			10	20	ms
Maximum Output Capacitance	Full load; 5% overshoot of Vout at startup	5000			µF
EFFICIENCY
100% Load			89		%
60% Load			90		%
ISOLATION CHARACTERISTICS
Input to Output		2250			Vdc
Isolation Resistance		10			MΩ
Isolation Capacitance			1500		pF
FEATURE CHARACTERISTICS
Switching Frequency			300		kHz
ON/OFF Control, Negative Remote On/Off logic
Logic Low (Module On)	Von/off at Ion/off=1.0mA	0		1.8	V
Logic High (Module Off)	Von/off at Ion/off=0.0 µA	2.4		18	V
ON/OFF Control, Positive Remote On/Off logic
Logic Low (Module Off)	Von/off at Ion/off=1.0mA	0		1.8	V
Logic High (Module On)	Von/off at Ion/off=0.0 µA	2.4		18	V
ON/OFF Current (for both remote on/off logic)	Ion/off at Von/off=0.0V			1	mA
Leakage Current (for both remote on/off logic)	Logic High, Von/off=15V			50	uA
Output Voltage Trim Range	Across Pins 9 & 5, Pout ≦ max rated power	-10%		10%	%
Output Voltage Remote Sense Range	Pout ≦ max rated power			10	%
Output Over-Voltage Protection	Over full temp range; % of nominal Vout		6		V
GENERAL SPECIFICATIONS
MTBF	Io=80% of Io, max; 300LFM @25℃		2.2		M hours
Weight			25		grams
Over-Temperature Shutdown	Refer to Figure 21 for measuring point		127		°C

DS_E36SR05015_01042008 2