Delta Electronics Series E24SR manual Features, Options, Applications

Contents DATASHEET DSE24SR0501201032008 FEATURESOPTIONS APPLICATIONSINPUT CHARACTERISTICS TECHNICAL SPECIFICATIONSOUTPUT CHARACTERISTICS DYNAMIC CHARACTERISTICSELECTRICAL CHARACTERISTICS CURVES For Positive Remote On/Off Logic For Negative Remote On/Off LogicNote Measured input reflected-ripple current with a simulated source Inductance LTEST of 12 μH. Capacitor Cs offset possible battery impedance. Measure current as shown above Figure 12 Input reflected ripple current, is, through a 12µH Soldering and Cleaning Considerations Safety ConsiderationsDESIGN CONSIDERATIONS Input Source ImpedanceOver-Current Protection FEATURES DESCRIPTIONSOver-Voltage Protection Remote SenseOutput Voltage Adjustment TRIM FEATURES DESCRIPTIONS CONEx. When Trim-down -10% 5V×0.9=0.45V Rtrim − down = ⎢THERMAL CONSIDERATIONS Thermal Testing SetupTHERMAL CURVES Thermal DeratingRECOMMENDED PAD LAYOUT SMD PICK AND PLACE LOCATIONSURFACE-MOUNT TAPE & REEL LEAD FREE SAC PROCESS RECOMMEND TEMP. PROFILE LEADED Sn/Pb PROCESS RECOMMEND TEMP. PROFILETemp TimeSurface-mount module MECHANICAL DRAWINGThrough-hole module Pin NoMODEL LIST PART NUMBERING SYSTEMWARRANTY MODEL NAMEat any time, without notice