Delta Electronics Series L36SA manual Output voltage noise and ripple measurement test setup

Page 6

ELECTRICAL CHARACTERISTICS CURVES

0

0

Figure 11: Input Terminal Ripple Current, ic, at full rated output current and nominal input voltage with 12µH source impedance and 33µF electrolytic capacitor (500 mA/div, 2us/div).

Figure 12: Input reflected ripple current, is, through a 12µH source inductor at nominal input voltage and rated load current (20 mA/div, 2us/div).

Vo(+)

Copper	Strip
10u	1u	SCOPE	RESISTIVE
10u	1u		LOAD
			LOAD

Vo(-)

Figure 13: Output voltage noise and ripple measurement test setup

DS_L36SA3R315_02142007

6

Image 6

Contents Delphi Series L36SA, 2 x 1.6, 50W Family Technical Specifications ParameterElectrical Characteristics Curves Typical full load input characteristics at room temperatureFor Negative Remote On/Off Logic Electrical Characteristics Curves Output voltage noise and ripple measurement test setup Output voltage Output current range Output current a Design Considerations Input Source ImpedanceFeatures Descriptions Features Descriptions CON Output Voltage Adjustment TrimThermal Testing Setup Thermal Derating Thermal ConsiderationsThermal Curves Mechanical Drawing Open Frame VersionPart Numbering System Model List