Weights, Input requirements, Output voltage

Compaq DA-11411 Weights, Input requirements, Output voltage, Specifications, Ambient temperature

Page 22

QuickSpecs

ProLiant BL20p and p-Class system

Technical Specifications

Operating and Performance Specifications for Power Enclosures (North America/Japan)

		Single-Phase Model	Three-Phase Model
Dimensions	Height	5.25 in/13.34 cm	5.25 in/13.34 cm
	Width	27.15 in/68.96 cm	27.15 in/68.96 cm
	Depth	17.60 in/44.7 cm	17.60 in/44.7 cm

Weights	No hot-plug power supplies	47.5 lb/21.55 kg	47.5 lb/21.55 kg
	All hot-plug power supplies	99.5 lb/45.13 kg	125.5 lb/56.93 kg

Input requirements	Rated input voltage	200 VAC to 240 VAC	200 VAC to 240 VAC line
			to line
	Rated input frequency	50 Hz to 60 Hz	50 Hz to 60 Hz
	Rated input current per side	24A	24A per phase
	Rated input power per side	5760 W	9976 W
	Power cord	1 NEMA L6-30P per side	1 NEMA L15-30 per side

Output voltage	Rated output voltage	-48.8 VDC to -54 VDC	-48.8 VDC to -54 VDC
specifications	Rated output current	99A	170A
	Rated output current	99A	170A
	Rated output power	4298 W	8310 W
	Nominal power	4158 W at 208 VAC	7202 W at 208 VAC

Ambient temperature	Operating	50° to 95° F/10° to 35° C	50° to 95° F/10° to 35° C
range (See note)	Shipping	-22° to 140°F/-30° to 60°C -22° to 140°F/-30° to 60°C
	Shipping	-22° to 140°F/-30° to 60°C -22° to 140°F/-30° to 60°C

Relative humidity,	Operating	20% to 80%	20% to 80%
non-condensing	Non-operating	5% to 95%	5% to 95%
(See note)	Non-operating	5% to 95%	5% to 95%
(See note)

Wet bulb temperature	Operating	82.4° F/28° C	82.4° F/28° C
	Non-operating	101.7° F/38.7° C	101.7° F/38.7° C

Note: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/ 9,144 m or

30.3KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F/45° C. Altitude maximum for storage is 70 KPa.

DA-11411

World Wide — Version 4 — September 19, 2002

Image 22

Contents

QuickSpecs OverviewConfiguration Steps Standard Features Server Blade ProLiant BL p Class RJ 45 patch panel ProLiant BL p Class Interconnect Switch OptionRequired Network Cabling BL p Class Power Distribution Compaq ProLiant BL p Class Power System and RackInformation ProLiant BL p Class Power Power Bus Box Required Power SourceStandard Features ProLiant Essentials Foundation Pack SoftwareIntelligent Manageability OS SupportAvailability Minimum Rack Requirements SecurityRack Airflow Requirements Service and Support Models Options Storage Controllers ProLiant Essentials Value Pack SoftwareCommunications Diagnostic Options BL p-Class Power optionsPower Distribution BL p-Class Server BladeCompaq Rack 10000 Series Compaq Rack 9000 Series OpalRack Options for Compaq Rack 9000 Series Rack Options for Compaq RackSeries Rack Options for Compaq Rack 7000 Series and Telco racksRack Options for Compaq Rack 10000, 9000 and 7000 Series Service and Support OfferingsRack Options for Telco Racks Installation & Start-up Services Memory Memory SlotTechnical Specifications Connector Operating and Performance DimensionsSpecifications for RJ-45 Patch Panel Power requirementsSafety WeightForwarding mode PerformanceAmbient temperature WeightsSpecifications Input requirementsQuickSpecs Max current per power feed Enclosures DimensionsMax total power supported Rated operating voltageOperating and Performance Voltage Specifications for Facility DCMax Rated Power CurrentCompaq Rack Dimensions Total Cabinet Shipping Color QuickSpecs

Compaq DA-11411 Weights, Input requirements, Output voltage, Specifications, Ambient temperature

QuickSpecs

Technical Specifications

Weights

Input requirements

Output voltage

specifications

Ambient temperature

non-condensing