Compaq P710, 910, 1210 manual Group, Contrast

17" Model

Group	Item	Item		Press the Minus Button			Press the Plus Button
Icon	Icon
		CONTRAST		To decrease the contrast.			To increase the contrast.
		BRIGHT		To decrease the brightness.			To increase the brightness.
SCREEN		COLORTEMPERATURE		To decrease the color temperature.			To increase the color tempera-
							ture.
				When FPM	is on, the color temperature is fixed to 9300K and it is not
			adjustable.
		HORIZ-SIZE		To narrow the width of the image			To expand the width of the image
				on the screen.			on the screen.
		HORIZ-PHASE		To move the image to the left.			To move the image to the right.
		VERT-SIZE		To narrow the height of the image			To expand the height of the image
				on the screen.			on the screen.
		VERT-POSITION		To move the image down.			To move the image up.
		PINCUSHION		To collapse the center of the			To expand the center of the
				image.			image.
				To decrease the width at the top			To increase the width at the top of
		KEYSTONE		of the screen image and to			the screen image and to decrease
				increase the width at the bottom.			the width at the bottom.
GEOMETRY		TOP-PIN		To expand the width of the screen			To narrow the width of the screen
				image near the corners of top.			image near the corners of top.
		BOTTOM-PIN		To expand the width of the screen			To narrow the width of the screen
				image near the corners of bottom.			image near the corners of bottom.
		PIN-BALANCE		To move the top and bottom of the			To move the top and bottom of
				screen image to the right.			the screen image to the left.
		KEY-BALANCE		To make the screen slant to the			To make the screen slant to the
				left.			right.
		ROTATION		To rotate the image counterclock-			To rotate the image clockwise.
				wise.
		GEOMETRY RESET					To restore to factory preset level.
		MOIRE CANCEL LEVEL		To decrease the level of the moire-clear wave.
				To eliminate an excessive green or white-back ground that
				may occur when external sync signals are applied to the
		CLAMPPULSEPOSITION		monitor.			To clamp the video signal at the
				To clamp the video signal at			back of the H-Sync pulse.
				the front of the H-Sync pulse.
VIDEO
		VIDEO LEVEL		To select 1.0V of video input.			To select 0.7V of video input.
		DEGAUSS					To eliminate possible color shad-
							ing or impurity.
		POWER-SAVE		To select the constant power			To select the power-save mode.
				consumption mode.
		CONTROL LOCK		To permit all OSD adjustments.			TolocktheOSDfunctionexceptfor
							"BRIGHT"and"CONTRAST".
				It shows the current scanning frequency and Preset No. or user mode.
MISC.		DIAGNOSIS
				To choose the language used on OSD.
		LANGUAGE		ENG......English,		ESP......Spanish, JPN......Japanese,
				GER......German,		FRA......French

ENGLISH

- 9 -