Operation
■Input Signal Out of Range: Indicates the monitor is unable to access or fully support the provided input signal.
■Going to Sleep: Indicates the screen display is entering a sleep mode.
■Check Video Cable: Indicates the video cable may not be plugged into the computer or the computer may not be turned on.
■OSD
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor utilizes less than 45 watts of power and the Power LED is green.
The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the Power LED is turned amber. When the monitor is in the reduced power state, the monitor will utilize less than 5 watts of power. There is a brief warm up period before the monitor will return to its normal operating mode.
Refer to your computer manual for instructions on setting energy saver features (sometimes called power management features).
✎The above energy saver feature only works when connected to computers that have energy saver features.
Reference Guide |