Compaq NetPorty II manual Installing the Software, If you start at serial port Driver installation

Installation

Installing the Software

2.3Installing the Software

2.3.1If you start at serial port

Driver installation:

1Insert the CD. The setup programm will start automatic, if not please start the program “START.EXE” in root path.

2Go to "Software Installation"

3Choose your operating system, is important.

4Choose your hardware component at the selection box then press "Start Installation". If the file is started (*.com file), follow the steps on the screen. If necessay type in the password.

5If password is correct software will be installed successful.

Application installation:

1Insert the CD. The setup programm will start automatic, if not please start the program “START.EXE” in root path.

2Go to "Software Installation"

3Choose your operating system, is important.

4Choose PcCANControl component at the selection box then press "Start Installation". If the file is started (*.com file), follow the steps on the screen. If necessay type in the password.

5Start PcCANControl, select “create a new project” and the NetPorty II hardware, at this case “Porty2- COM1” or “Porty2-COM2”. After the selection the necessary NetPorty II software is activated on your PC. For further information see also chapter about PcCANControl.

It is not necessary to install a driver. The software works with the standard Win32 serial communication services with 115200bps, 8 bits, no parity, 1 stop bit.

Version 1.03 2-4