Compaq NetPorty II manual Info

Installation

Installing the Software

This software is a Win32-Console-Application and runs under Win95 and WinNT.

Usage:

-Connect your NetPorty II with one serial port.

-If you do not use COM1 please change it into the file L.BAT.

-Start L.BAT.

-If you get error messages like

"BSL: no response from the target hardware"

it is possible that you have used the wrong COM port.

-If you get the message below

"-- COMx Loading bootload.h86..Ready" without any error message in the next line, all activities are correct finished

-Leave the software with pressing the ESC key, sometimes Alt X does not work.

Info:

The program LDFSER.EXE is a loader that burns firmware in the Porty-Flash and also it is a serial monitor to display firmware print-outs.

The serial parameter are 115200,8,n,1.

I+ME also can deliver a loader to start firmware in the RAM and a little firmware demo (Keil-C).

Please contact us if you want to develop your own firmware.

Version 1.03 2-6