Compaq 5525B/31/32 manual Programmable Reset

Page 18

Chapter 2 Configuring the PCL-II Emulation with Control Codes

Programmable Reset

The programmable reset escape sequence (ESCE) causes the printer to eject paper to the top-of-form (position 0,0) if not already at top-of-form. This command resets all current printer configuration values to the following states. The printer remains on-line after a programmable reset. When the printer is reset, it is set to a known state as follows:

•Primary and secondary character sets (fonts) as configured from the control panel.

•Vertical line spacing (6/8 LPI) as configured from the control panel.

•Paper moves to the next Top of Form position (if not currently at Top of Form).

•Data buffer is printed and then the buffer is cleared.

•Standard VFC channel assignments selected as defined by physical page length.

•Margins set at maximum limits and/or Left margin set at first column (0).

•Physical page length remains as configured from the control panel.

•Logical page length = physical page length

•Text length = logical page length minus one inch

•All character font attributes (symbol set, pitch, style, and density) default to the character font configured from the control panel.

•Display functions off and Underline enhance disabled.

•Perforation skip mode as configured from the control panel.

•Enable/Disable Label Card as configured from control panel.

•Printronix linefeed emulation as configured from control panel.

•Raster graphics horizontal resolution as configured from the control panel. Vertical resolution set to 72 dots per inch.

18

Image 18

Contents 5525B/31/32 Line Matrix Printer Page PCL-II Programmer’s Reference Manual Page Trademark Acknowledgements Page Table of Contents Standard Ascii Character Set Introduction Related Product InformationSoftware Features HP PCL-II HP PCL-II Emulation Default Settings Switching Between the EmulationsConfiguring the PCL-II Emulation with Control Codes Printer Feature Set CompatibilityGeneral Information Programmatic Printer ControlLogical and Physical Pages Escape Sequences Combining Escape SequencesPCL Level Escape Sequences Line Printer Escape Sequences Explanation Programmable Reset Character Font Selection Symbol Set Selection OCR-A Printing in the Hex 80 through Hex FF Region Print Pitch SelectionCharacter Style Selection Character Density Selection PCL LevelHS DP NLQ Switching Character Fonts Display Functions Mode Print Mode SelectionSelf-test Line Spacing Vertical Forms Control VFCStandard Computed VFC Page Programmable VFC Special VFC ConsiderationsProgrammable VFC Using PCL Example FormChannel Line Configuring the PCL-II Emulation with Control Codes Programmable VFC Ascii CTL MSB/LSB Example VFC Data Entry Methods \CHANGEQ 7 to 00 \CHANGEQ 8 to Logical Page Length Selection Logical Page Length SelectionPerforation Skip Mode Text Length Vertical Margin SelectionHorizontal Margin Selection Transparent Print DataCursor Control Raster Graphics ESC*b# of raster lines YUnderlining Character Overstrike Bar CodesESC*z#V Bar Code Selection ESC*z#Q Bar Code Header Control ESC*z#C Bar Code Label PlacementESC*z#H Bar Code Height ESC*zBar Code DataZ Bar Code Label DataPrinting Bar Codes Printing Multiple Labels On The Same Line Printing Bar Codes With TextBar Code Width Information Bar Code Number of Characters SentCode 3 EAN8 Royal MailAdditional Product ID Assigned By Manufacturer N3+an..30 Width, Diameter, or 2nd Dimension, Inches, Logistics N4+n6 US Postnet Barcodes Data Value Representation256X US Postnet BAR Code CPI 22.5 Bars per inch US Postnet BAR Code2 3 4 5 6 7 8 9 CPI 20 Bars per inch US Postnet Bar Code CPI 20 Bars per inch US Postnet Bar Code MethodConfiguring the PCL-II Emulation with Control Codes Standard Ascii Character Set Appendix a Index Bar Code Underlining PCL-II Upca Page Page 5525B/31/32 Line Matrix Printer