Christie Digital Systems 38-VIV208-03 Basic Operation, Turning On the Projector, Enter a PIN code

Page 20

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer, VCR,

 

etc.) before turning on the projector.

2

Connect the projector's AC power cord into an AC outlet.

 

The POWER indicator blinks red in a moment and lights red.

3

Press the POWER ON-OFF button on the top control or on

 

the remote control. The POWER indicator turns green

 

lighting and the cooling fans start to operate. The

 

preparation display appears on the screen and the count

 

down starts.

4

After the count-down, the input source that was selected

 

last and the Lamp mode status icon (see page 45) appear on

the screen.

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Select a number by pressing the Point 7 8 button and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SELECT button so that you can start to operate the projector.

If you entered a wrong PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

What is PIN code?

PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector.

A PIN code consists of a four-digit number. Refer to PIN Code Lock function in Setting on page 47 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Set a new PIN code with special care, write it down in column on page 63 of this manual, and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

16

The preparation display disappears after 20 seconds.

Selected Input Source and Lamp Mode

Lamp mode

(See page 45 for Lamp mode.)

PIN code Input Dialog Box

Pointer

After the OK icon disappears, you can operate the projector.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model Features and Design Compact Design Blackboard FunctionTable of Contents To the User Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandMoving the Projector Installing the Projector in Proper PositionAir Circulation Compliance Federal Communication Commission NoticeBack Bottom Part Names and FunctionsFront Rear Terminal Top Control Remote Control @1 !3Laser Pointer Function Pointer FunctionWireless Mouse Operation Operating RangeRemote Control Code Remote Control Battery InstallationButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImagePositioning the Projector InstallationAdjustable Feet 200 240 V AC Connecting the AC Power CordFor the U.S.A. and Canada For Continental Europe Connecting to a Computer Cables used for connectionConnecting to Video Equipment External Audio Equipment Video cableConnecting to Component Video Equipment CableWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Remote ControlOn-Screen Menu Top ControlMenu Bar PC System MenuZoom and Focus Adjustment Auto Setup FunctionNo Show Function Keystone AdjustmentPicture Freeze Function Timer Function Sound AdjustmentVolume MuteComputer Input Input Source SelectionMode Computer System SelectionAuto Auto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection Image Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Source Select Menu VideoInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentImage button Dynamic Standard Cinema BlackboardGreen CinemaImage1~4 Color TintProgressive FilmProvides image at a normal video aspect ratio of 4 Setting SettingAuto setup LanguageBlue back DisplayLogo PIN code lock Enter a Logo PIN codeLogo CaptureCeiling RearStandby mode Power managementLamp mode On startRemote control PointerUSB Key lockTo Change the PIN code To Change the PIN code lock settingPIN code lock Lamp counter reset Factory defaultFan Factory default FanThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixTerminal item cannot be selected Remote Control does not workComputer 2 cannot be selected Menu Tree System Setting Image SelectIndicators and Projector Condition Projector is OFF. The AC power cord is unpluggedKHz Compatible Computer SpecificationsFreq Technical Specifications Accessories Optional PartsThis cable is used for RGB Scart 21-Pin Video output of video equipmentConfigurations of Terminals USB Connector Series BTerminal HDB15-PIN Terminal DVI-ILogo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Part No -A 610 319 8002 1AA6P1P4777-- MT7K
Top Page Image Contents