Setting
Setting
This projector has Setting menu that allows you to set up the other various functions described as follows;
1 | Press the MENU button to display the |
| Press the Point 7 8 button to move the red frame pointer to |
| the Setting Menu icon. |
2 | Press the Point d button to move the red frame pointer to |
| the item that you want to set and then press the SELECT |
button. The Setting dialog box appears.
Language
The language used in the
Auto setup
This function enables Auto Keystone correction and Auto PC adjustment by pressing the AUTO SET UP button on the top control or the AUTO SET button on the remote control. Settings for those functions can be altered as follows:
Auto PC Adj.
On . . . . . . .enables Auto PC Adjustment when pressing the AUTO SET button on the remote control or the AUTO SET UP button on the top control.
Off . . . . . . .disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . . always works and corrects keystone distortion according to the projector's tilt.
Manual . . . .works only when pressing the AUTO SET button on the remote control or the AUTO SET UP button on the top control.
Off . . . . . . .disables Auto Keystone.
✔Note:
•Auto PC Adj. and Auto Keystone cannot be set "Off" at the same time.
•Auto Keystone corrects vertical distortion only, not correct horizontal distortion.
•The Auto Keystone cannot work when Ceiling feature is On in the Setting menu. (p44)
•Perfect correction of the image distortion cannot be ensured with the Auto Setup function. If the distortion is not corrected properly by pressing the AUTO SETUP/ AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu. (See p25 or Keystone feature below.)
Keystone
This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 button, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point ed78 button.
Store . . . . stores the keystone adjustment even if the AC power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power cord is disconnected.
Setting Menu (Language)
Set the red frame | Setting Menu icon |
pointer to the item |
|
and press the |
|
SELECT button. |
|
When pressing the SELECT button at Language, the Language Menu appears.
Auto setup
Select Auto setup and this box appears. Choose desired setting for Auto keystone and Auto PC adj. with the Point 7
8button.
42