Christie Digital Systems 38-VIV208-03 Computer 2 cannot be selected, Remote Control does not work

Appendix

Some displays are not seen	– Check the Display item. (See “Setting” on page 43.)
during the operation.

PIN code dialog box appears at start-up.– PIN code lock is being set. Input a PIN code (1234 or numbers you have

	set). (See “PIN code lock” on page 20 and 47.)
Computer 2 cannot be selected.	– Select Computer 2 at the Terminal item in the Setting Menu. (See “Setting”
	on page 44.)
The Terminal item cannot be selected.	– The Terminal item in the Setting Menu cannot be selected after Computer 2
	is selected. Select other input source such as Computer 1 or Video with the
	INPUT button on the top control, the COMPUTER button or the VIDEO
	button on the remote control so that the Terminal item can be selected.
The Remote Control does not work.	– Check the batteries.
	– Make sure no obstruction is between the projector and remote control.
	– Make sure you are not too far from the projector when using the remote
	control. Maximum operating range is 16.4’ (5m).
	– Make sure the code of the remote control is conformed to the projector.
	(See page 14 and 46.)
	– Unlock Key lock for the remote control in the Setting Menu. (See page 46.)

Wireless Mouse function does not work. – Make sure your computer is connected to the projector with a USB cable. (See page 17.)

–Check cable connection between the projector and your computer. (See page 17.)

WARNING:

High voltages are used to operate this projector. Do not attempt to open cabinet.

You can often correct operating problems yourself. If the projector fails to work properly, see "Troubleshooting" on pages 54 and 55.

If after following all operating instructions, you find that service is necessary, contact the Christie Service Station or store where you purchased the unit.

Give the model number and explain the difficulty. We will advise you how to obtain service.

Appendix

The CE Mark is a Directive conformity mark of the European Community (EC).

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

55