Christie Digital Systems 38-VIV208-03 Input Source Selection Component, RGB Scart 21-Pin

Page 36

Video Input

Input Source Selection (Component, RGB Scart 21-Pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 button to move the red frame
	pointer to the Input Menu icon.
2	Press the Point d button to move the red arrow pointer to
	Computer 2, and then press the SELECT button. The Source
	Select Menu will appear.
3	Move the pointer to the correct input source and then press
	the SELECT button.
		When the input source is coming from video
Component
		equipment connected to the COMPUTER IN 2/

		COMPONENT IN/ MONITOR OUT terminal with
		a Component-VGA Cable, select Component.
		When the input source is coming from video
RGB (Scart)
		equipment connected to the COMPUTER IN 2/

		COMPONENT IN/ MONITOR OUT terminal with
		a Scart-VGA Cable, select RGB (Scart).

INPUT button

Computer 1

Computer 2 ✳

Video

COMPUTER button

Computer 1

Computer 2 ✳

✳See Note at the bottom of this page.

Input Menu icon

Input Menu

Move the pointer (red arrow)

to Computer 2 and press the

SELECT button.

Computer

2

Source Select Menu

Move the pointer to Component or RGB (Scart) and press the SELECT button.

✔Note:

•Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 61 for order.

•Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/ MONITOR OUT terminal is set as Monitor out. (p44)

36

Image 36

Contents Model Features and Design Compact Design Blackboard FunctionTable of Contents To the User Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandInstalling the Projector in Proper Position Air CirculationMoving the Projector Compliance Federal Communication Commission NoticePart Names and Functions FrontBack Bottom Rear Terminal Top Control Remote Control @1 !3Laser Pointer Function Pointer FunctionWireless Mouse Operation Operating RangeRemote Control Code Remote Control Battery InstallationButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImageInstallation Adjustable FeetPositioning the Projector Connecting the AC Power Cord For the U.S.A. and Canada For Continental Europe200 240 V AC Connecting to a Computer Cables used for connectionConnecting to Video Equipment External Audio Equipment Video cableConnecting to Component Video Equipment CableWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Remote ControlOn-Screen Menu Top ControlMenu Bar PC System MenuZoom and Focus Adjustment Auto Setup FunctionKeystone Adjustment Picture Freeze FunctionNo Show Function Timer Function Sound AdjustmentVolume MuteComputer Input Input Source SelectionComputer System Selection AutoMode Auto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HImage Level Selection Image Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Source Select Menu VideoInput Source Selection Component, RGB Scart 21-Pin Input button Computer Video Computer buttonVideo System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image1~4Image button Dynamic Standard Cinema BlackboardGreen Color TintProgressive FilmProvides image at a normal video aspect ratio of 4 Setting SettingAuto setup LanguageBlue back DisplayLogo PIN code lock Enter a Logo PIN codeLogo CaptureCeiling RearStandby mode Power managementLamp mode On startRemote control PointerUSB Key lockTo Change the PIN code lock setting PIN code lockTo Change the PIN code Lamp counter reset Factory defaultFan Factory default FanMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the matters below Cleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixRemote Control does not work Computer 2 cannot be selectedTerminal item cannot be selected Menu Tree System Setting Image SelectIndicators and Projector Condition Projector is OFF. The AC power cord is unpluggedCompatible Computer Specifications FreqKHz Technical Specifications Accessories Optional PartsThis cable is used for RGB Scart 21-Pin Video output of video equipmentConfigurations of Terminals USB Connector Series BTerminal HDB15-PIN Terminal DVI-IPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Part No -A 610 319 8002 1AA6P1P4777-- MT7K