Christie Digital Systems 38-VIV302-01 user manual To change code of Projector

Page 40

SETTING

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and counting down display appears (for 5 minutes).

2.After counting down for 5 minutes, projector lamp and READY indicator are turned off.

3.When READY indicator flashing, Projection Lamp can be turned on again (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when input signal connected or projector is operated with any button on Top Control or on Remote Control Unit again.

On start

When this function is “On,” projector is automatically turned on just by switching MAIN ON/OFF SWITCH on.

Note ; Be sure to turn projector off properly (refer to section “TURNING OFF PROJECTOR” on P21). If projector is turned off in wrong steps, On Start function does not operate properly.

Time left until Lamp off.

Press SELECT button at this icon to display other items.

On start

Press SELECT button at this icon to display previous items.

Move pointer to item and then press

POINT LEFT/RIGHT button(s).

Lamp Mode

This Projector is equipped with 2 Projection Lamps and a number of using lamps can be switched to 2 lamps or 1 lamp. Using 1 lamp maintain life of Projection Lamps.

To change over Lamp Mode

1.Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select SETTING and press SELECT button. Setting dialog box appears.

2.Press POINT DOWN button to move a red frame pointer to “Lamp mode”. Set "2 lamps mode" or "1 lamp mode" by pressing POINT LEFT/RIGHT button(s). When Lamp Mode is set from "2 lamps mode" to "1 lamp mode" image becomes little darker. When Lamp Mode is set from "1 lamp mode" to "2 lamps mode" image become brighter gradually.

NOTE : After changing Lamp Mode, it can not be switched again for 90 seconds.

Remote control

This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.

When operating projector in “Code 2,” both projector and Remote Control Unit must be switched to “Code 2.”

To change code of Projector;

Set Remote control in SETTING MENU to “Code 2.”

To change code of Remote Control Unit;

Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds.

After changing code, make sure Remote Control operates properly.

To return to normal code (Code 1), operate both projector and Remote Control in ways above again.

NOTE : When batteries of Remote Control Unit are replaced or ALL-OFF switch is turned to “ALL-OFF,” remote transmit code automatically returns to normal code (Code 1).

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Model To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design CompatibilityPreparation Name of Each Part of ProjectorConnecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Lens Shift Adjustment Preparation Lens InstallationPositioning Projector Preparation Picture Level and Tilt Adjustment Moving ProjectorReplacement of Terminal Connecting ProjectorTerminals of Projector Connecting Projector INPUT/OUTPUT Terminals and Jacks Input Input 1, 2Audio Output Jacks Connecting to Computer Terminals ProjectorConnecting to Video Equipment 2INPUT Terminals of a ProjectorTOP Controls and Indicators Before OperationOperation of Remote Control Laser Pointer FunctionRemote Control Batteries Installation Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Screen MenuBasic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorFocus Adjustment Adjusting ScreenKeystone Adjustment Basic Operation Picture Freeze Function Timer FunctionNo Show Function Sound Adjustment Direct OperationMenu Operation Sound MenuComputer Input Selecting Input SourceSelecting Computer System InputComputer Input Automatic MULTI-SCAN System Select Computer System ManuallyAuto PC System MenuComputer Input Compatible Computer Specifications ResolutionPC Adjustment Auto PC AdjustmentPC Adjust Menu Computer InputComputer Input Manual PC Adjustment Display area H Display areaFull screen Picture Image Adjustment Image Level Select DirectImage Level Select Menu Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuWhen Select Input 3 AV Terminal Video InputSelecting Video System Video InputAuto AV System Menu Video or S-VIDEOCinema Video Input Image Level Adjustment ColorTint Progressive scanProvides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change code of Remote Control Unit To change code of ProjectorProjector mode Wireless Mouse modeLamp counter reset Operating Wireless Mouse MaintenanceInstallation Operating Wireless MouseAppendix AIR Filter Care and Cleaning Cleaning Projection LensAppendix Lamp Management Yellow Lamp Dim Lamp Red Lamp Mark on LampAppendix Lamp Replacement Figure shows case of replacing LampLamp Handling Precautions Troubleshooting Service Technical Specifications Appendix Configurations of Terminals HDB 15-PIN Terminal AnalogUSB Port Terminal Part No -A 610 305 5152 1AA6P1P3895-- MY8K

38-VIV302-01 specifications

Christie Digital Systems has established itself as a leader in the visual display industry, and the Christie 38-VIV302-01 is a testament to this reputation. This model is designed to meet the demands of various professional applications, including control rooms, corporate environments, educational institutions, and entertainment venues.

One of the standout features of the 38-VIV302-01 is its advanced visualization technology. It incorporates robust 4K resolution capabilities, which provide crystal-clear images and vibrant colors. This is essential for applications that require detail and precision, as it enables users to see the most intricate of details in their visual content. With a wide color gamut, the projector can reproduce a vast array of colors, enhancing the overall viewing experience.

In terms of connectivity, the 38-VIV302-01 offers multiple input options, ensuring compatibility with a variety of sources. This flexibility allows users to connect different devices seamlessly without worrying about compatibility issues. The inclusion of HDMI, DisplayPort, and various analog inputs makes it easy to integrate into existing systems or to scale up as needs evolve.

Another key characteristic of the Christie 38-VIV302-01 is its state-of-the-art light source technology. It utilizes laser illumination, which not only improves brightness levels and contrast ratios but also extends the lifespan of the projector. This feature is particularly important for long-term installations, reducing maintenance costs and downtime for users.

The design of the projector is also noteworthy. It features a compact and lightweight build, making it easy to mount in various environments, from boardrooms to event spaces. The whisper-quiet operation ensures that it won't distract viewers during presentations or performances, making it particularly useful in settings where concentration and focus are paramount.

In addition to its hardware features, the Christie 38-VIV302-01 integrates advanced software capabilities. This includes support for collaborative platforms, allowing multiple users to contribute and engage with the content being displayed. Furthermore, it offers enhanced security features, ensuring that sensitive information remains protected.

Overall, the Christie 38-VIV302-01 embodies the company's commitment to quality and innovation in visual display technology, making it an ideal choice for professionals seeking reliable and high-performance projection solutions. With its impressive specifications and user-friendly features, it continues to set a standard within the industry.
Top Page Image Contents