Christie Digital Systems 38-VIV207-01 user manual Basic Operation, Turning on / OFF Projector

Page 19

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING

 

PROJECTOR" on pages 11~13 for connecting the equipment.)

2

Connect the projector's AC Power Cord into an AC outlet. LAMP

Indicator lights RED, and READY Indicator lights GREEN.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to page 37.)

3

Press POWER ON-OFF button on Top Control or on Remote

Control Unit to ON. LAMP Indicator dims, and Cooling Fans

start to operate. Preparation Display appears on a screen and count-down starts. The signal from PC or Video source appears after 30 seconds.

Current Input position and Lamp mode status are also displayed on screen for 5 seconds. (Refer to "LAMP MODE" on page 37.)

Input position and

Lamp mode status

Computer 1

30

Preparation Display disappears after 30 seconds.

TURNING OFF PROJECTOR

1

Press POWER ON-OFF button on Top Control or on Remote

Control Unit, and a message "Power off?" appears on a screen.

2

Press POWER ON-OFF button again to turn off the projector.

LAMP Indicator lights bright and READY Indicator turns off.

 

After the projector is turned off, Cooling Fans operate (for 90

 

seconds). During this "Cooling Down" period, this appliance can

 

not be turned on.

3

When projector has cooled down, READY Indicator lights

GREEN again and you can turn the projector on. After cooling

down completely, disconnect AC Power Cord.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

Power off?

Message disappears after 4 seconds.

When “Power Management” function is ON, projector detects signal interruption and turns off Projection Lamp automatically. Refer to “Power management” on pages 37.

When WARNING TEMP. indicator flashes red, projector is automatically turned off. Wait at least 5 minutes, confirm READY indicator will light green and projector may be turned on by pressing POWER ON-OFF button.

When both WARNING TEMP. and READY indicators to flash, a projector can not be turned on by pressing POWER ON- OFF button. In this case, follow procedures below:

1.Disconnect AC Power Cord from an AC outlet.

2.Turn a projector on again. (Refer to steps 2-3 of TURNING ON PROJECTOR on this page.)

When WARNING TEMP. indicator continues to flash, follow procedures below:

1.Disconnect AC Power Cord from an AC outlet.

2.Check Air Filters for dust accumulation.

3.Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 41.)

4.Turn a projector on again. (Refer to steps 2-3 of TURNING ON PROJECTOR on this page.)

If WARNING TEMP. indicator should still continue to flash, contact sales dealer where you purchased this projector or service center.

19

Image 19
Contents Model To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignName of Each Part of Projector PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Room Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetMonitor Output Connecting ProjectorUSB Connector Series B Terminals of ProjectorProjector Connecting to ComputerConnecting Projector TerminalsAudio Video Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlInside the Battery Compartment BOX Before OperationSelect Button Point Volume + ButtonsTimer Button Zoom ButtonLamp Replace Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Turning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentSound Adjustment Selecting Input Source Computer InputRGB Auto Selecting Computer SystemPC System Menu Resolution Computer Input Compatible Computer SpecificationsXGA Auto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area H Display areaFull screen Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputVideo AV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change the code of Projector To change the code of the Remote Control UnitAppendix Lamp ReplacementLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsInstallation Operating Wireless MouseOperating Wireless Mouse Recommendation MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensTroubleshooting Service Technical Specifications Computer INPUT-1 and Monitor OUT Terminals Analog Appendix Configurations of TerminalsControl Port Connector USB Connector Series BPOA-MACAP Appendix Optional PartsPOA-MCPS2 POA-MCMACPage Part No -A 610 307 0469 1AA6P1P4023-- MC3K

38-VIV207-01 specifications

Christie Digital Systems, a leader in digital projection technology, offers a remarkable solution for professional installations with the 38-VIV207-01 model. This innovative display is designed to cater to a wide range of applications, from corporate environments to entertainment venues, enhancing visual experiences with advanced features and technologies.

One of the standout characteristics of the Christie 38-VIV207-01 is its impressive resolution. Sporting a high-definition display, it ensures that users enjoy crisp, vibrant visuals that are essential for any professional setting. The clarity and accuracy of the images make it ideal for presentations, video conferencing, and immersive media experiences, allowing for detailed content to be appreciated as intended.

In terms of brightness, the 38-VIV207-01 delivers outstanding performance. With a significant brightness level, it ensures visibility in various lighting conditions, making it a versatile choice for both dimly lit and well-lit environments. This feature is particularly beneficial for settings such as trade shows or large auditoriums, where ambient light can often detract from the viewing experience.

The model is also equipped with a range of connectivity options, allowing it to integrate seamlessly with different systems and devices. Whether connecting to a laptop, media player, or other sources, the 38-VIV207-01 offers flexibility that caters to diverse user needs. This versatility is further enhanced by compatibility with various input formats, ensuring that it meets the demands of modern technology.

For users looking for reliability, Christie has built the 38-VIV207-01 with durability in mind. Designed for long-term operation, it features enhanced cooling and energy-efficient components that minimize downtime. This makes it an ideal choice for installations that require consistent performance over extended periods.

Additionally, the model boasts advanced color calibration capabilities, ensuring that the display maintains accurate color reproduction. This is essential for applications where color fidelity is critical, such as graphic design, video production, and medical imaging.

Overall, the Christie Digital Systems 38-VIV207-01 stands out as a top-tier display solution, combining high definition, brightness, connectivity, and reliability. Whether for corporate or entertainment use, its array of features and technical advancements make it a worthy investment for those seeking superior visual performance.