Christie Digital Systems 38-VIV207-01 Lamp Handling Precautions, Appendix Lamp Replace Counter

Page 39

APPENDIX

LAMP REPLACE COUNTER

Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting.

1

Turn projector on, press MENU button and ON-SCREEN

 

MENU will appear. Press POINT LEFT/RIGHT button(s) to

 

move a red frame pointer to SETTING Menu icon (refer to

 

page 36, 37).

2

Press POINT DOWN button to move a red frame pointer to

 

“Lamp counter reset” and then press SELECT button. The

 

message "Lamp replace counter reset?" is displayed. Move

 

the pointer to [Yes] and then press SELECT button.

3

Another confirmation dialog box appears and select [Yes] to

reset Lamp Replace Counter.

On

On

Code 1

Move the pointer to Lamp counter reset and then press SELECT button. The message “Lamp replace counter reset?” is displayed.

NOTE : Do not reset the Lamp Replace Counter until after the Projection Lamp is replaced.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Model To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Features and DesignPreparation Name of Each Part of ProjectorHOT AIR Exhausted SETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe Room Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetMonitor Output Connecting ProjectorUSB Connector Series B Terminals of ProjectorProjector Connecting to ComputerConnecting Projector TerminalsAudio Video Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlInside the Battery Compartment BOX Before OperationSelect Button Point Volume + ButtonsTimer Button Zoom ButtonLamp Replace Indicator TOP Controls and IndicatorsHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowSound Menu Turning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentSound Adjustment Computer Input Selecting Input SourceRGB Selecting Computer System AutoPC System Menu Computer Input Compatible Computer Specifications ResolutionXGA Auto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area Display area HFull screen Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Input VideoVideo AV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Setting MenuSetting Menu To change the code of Projector To change the code of the Remote Control UnitLamp Replacement AppendixLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsOperating Wireless Mouse InstallationOperating Wireless Mouse Recommendation MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensTroubleshooting Service Technical Specifications Computer INPUT-1 and Monitor OUT Terminals Analog Appendix Configurations of TerminalsControl Port Connector USB Connector Series BPOA-MACAP Appendix Optional PartsPOA-MCPS2 POA-MCMACPage Part No -A 610 307 0469 1AA6P1P4023-- MC3K

38-VIV207-01 specifications

Christie Digital Systems, a leader in digital projection technology, offers a remarkable solution for professional installations with the 38-VIV207-01 model. This innovative display is designed to cater to a wide range of applications, from corporate environments to entertainment venues, enhancing visual experiences with advanced features and technologies.

One of the standout characteristics of the Christie 38-VIV207-01 is its impressive resolution. Sporting a high-definition display, it ensures that users enjoy crisp, vibrant visuals that are essential for any professional setting. The clarity and accuracy of the images make it ideal for presentations, video conferencing, and immersive media experiences, allowing for detailed content to be appreciated as intended.

In terms of brightness, the 38-VIV207-01 delivers outstanding performance. With a significant brightness level, it ensures visibility in various lighting conditions, making it a versatile choice for both dimly lit and well-lit environments. This feature is particularly beneficial for settings such as trade shows or large auditoriums, where ambient light can often detract from the viewing experience.

The model is also equipped with a range of connectivity options, allowing it to integrate seamlessly with different systems and devices. Whether connecting to a laptop, media player, or other sources, the 38-VIV207-01 offers flexibility that caters to diverse user needs. This versatility is further enhanced by compatibility with various input formats, ensuring that it meets the demands of modern technology.

For users looking for reliability, Christie has built the 38-VIV207-01 with durability in mind. Designed for long-term operation, it features enhanced cooling and energy-efficient components that minimize downtime. This makes it an ideal choice for installations that require consistent performance over extended periods.

Additionally, the model boasts advanced color calibration capabilities, ensuring that the display maintains accurate color reproduction. This is essential for applications where color fidelity is critical, such as graphic design, video production, and medical imaging.

Overall, the Christie Digital Systems 38-VIV207-01 stands out as a top-tier display solution, combining high definition, brightness, connectivity, and reliability. Whether for corporate or entertainment use, its array of features and technical advancements make it a worthy investment for those seeking superior visual performance.
Top Page Image Contents