Connecting the Projector to a
Portable Computer
1.Rotate the elevator foot to balance the projector.
2.Connect one end of the projector signal cable to the
projector and the other end to the VGA connector B or the DFP connector A on the portable computer and tighten the screws. Use the VGA cable OR the DFP cable; do not connect both cables.
✎Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector.
3. Connect one end of the power cord into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.
4.Turn on the projector first, then turn on the computer.
✎For more information on setting up the projector with a portable
computer, see the white paper included on the
MP1400 Microportable Projector |