Compaq MP1400 manual Connecting a Video Player, Video On-Screen Menu Adjustments

Connecting a Video Player

✎If your video player uses a round, one-prong composite video connector, use the RCA video cable. If your video player uses a round, four-prong S-video connector, use the S-video cable. Both cables are included with the optional Compaq Multimedia Adapter.

1.Plug the RCA video cable into the video-out port on the video player and the video port on the video adapter. If you are using the S-video cable, connect it to the S-video out connector on the video player and the S-video port on the video adapter.

2.Turn on the projector first, then the video player.

3.Push the Source button on the back of the multimedia adapter to toggle and switch the projector signal from data (computer icon) to video (TV icon). The data mode receives computer inputs, and the video mode receives video input such as a TV tuner, VCR, video, or camera.

With the optional Compaq Multimedia Adapter attached, the projector is compatible with major video standards such as NTSC, PAL, and SECAM. Use the on-screen menu to adjust the video performance manually, or press the Resync button on the projector panel to optimize it automatically.

Video On-Screen Menu Adjustments

When the optional Multimedia Adapter is attached to the projector and the video source is selected, an alternate video on-screen menu can be displayed on the projected screen. This menu includes some selections that are relevant to the multimedia functions of the video adapter.

To display the Video on-screen menu:

	1.	Attach the optional Compaq Multimedia Adapter to
		the projector.
￿	2.	Attach a video source to the projector.	￿

3-6 MP1400 Microportable Projector