Compaq manual MP1400 Microportable Projector

Connecting a Camcorder, VCR, or DVD Player to the Optional Multimedia Adapter

✎A rubber boot cover protects the DFP (digital) connector on the projector. Be sure to remove the cover before connecting the Multimedia Adapter to the projector and replace the cover when the projector is not in use to prevent electrostatic discharges from damaging the connector.

1. Use an RCA cable to connect a VCR to the video connector on the optional Multimedia Adapter. Use an S-video cable to connect a camcorder or DVD player to the S-video connector on the optional Multimedia Adapter.

2. Connect one end of the power cord into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector.

3. To connect the multimedia adapter speaker for sound, connect the RCA audio cable to the audio- in port on the optional Multimedia Adapter and the audio-out port on the VCR, camcorder, or DVD player. If you are not using the speaker at this time, skip to the next step.

￿￿

3-4 MP1400 Microportable Projector