3. Projecting an Image (Basic Operation)
Correcting Keystone Distortion Manually
You can also correct the vertical keystone distortion manually.
NOTE: Manual keystone correction is not available when there is no signal received by any input.
Adjust the keystone distortion manually in the following cases:
•To fine tune Keystone correction even after performing the [Auto Keystone] adjustment.
•When the menu setting for [Auto Keystone] is turned off
Adjusting with buttons on the cabinet
1. Press the SELECT or button with no menus displayed.
The slide bar will be displayed for your adjust- ment.
2.Press the EXIT button. The slide bar will be closed.
SELECT
LAMP
STATUS
POWER 
ON/STAND BY | SOURCE | AUTO ADJ. | FOCUS |
Adjusting with the remote control
1.Press the MENU button. The menu will be displayed.
2. Use the SELECT button to select [Setup - General] and then press the ENTER button.
3. Select the Keystone function.
Use the SELECT button to select [Keystone].
25