Acoustic Energy LT35, LT30, LT25 manual Iii, Important Information Fire and Shock Precautions

Page 5

Important Information

Fire and Shock Precautions

•Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.

•Do not try to touch the ventilation outlet on the right front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off.

•Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your project. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel.

•Do not place any objects on top of the projector.

•Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

•The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply fits this requirement before attempting to use your projector.

•Do not look into the lens while the projector is on. Serious damage to your eyes could result.

•Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpre- dictable outcome such as fire or injury to the eyes.

•Do not cover the lens with the black lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output.

•Do not place any objects, which are easily affected by heat, in front of the projector lens or a projector exhaust vent. Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the light output and exhaust.

•Handle the power cable carefully. A damaged or frayed power cable can cause electric shock or fire.

-Do not use any power cables than the supplied one.

-Do not bend or tug the power cable excessively.

-Do not place the power cable under the projector, or any heavy object.

-Do not cover the power cable with other soft materials such as rugs.

-Do not heat the power cable

-Do not handle the power plug with wet hands.

•Turn off the projector, unplug the power cable and have the object removed by a qualified NEC service personnel under the following conditions:

-When the power cable or plug is damaged or frayed.

-If liquid has been spilled into the projector, or if it has been exposed to rain or water.

-If the projector does not operate normally when you follow the instructions described in this user's manual.

-If the projector has been dropped or the cabinet has been damaged.

-If the projector exhibits a distinct change in performance, indicating a need for service.

-If the projector is not to be used for an extended period of time.

•Disconnect the power cable and any other cables before carrying the projector

•Turn off the projector and unplug the power cable before cleaning the cabinet or replacing the lamp.

CAUTION

•Do no use the tilt-foot for purposes other than originally intended. Misuses such as using the tilt foot to carry or hang (from the wall or ceiling) the projector can cause damage to the projector.

•Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged.

•Select [High] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [Setup - Options] → [Fan Mode] → [High].)

•Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.

•Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green.

Doing so could cause premature lamp failure.

iii

Page 4 Page 6
Image 5
Page 4 Page 6
Contents LT35/LT30/LT25 Page Precautions Safety CautionsImportant Information DOC Compliance Notice for Canada onlyInstallation Important SafeguardsImportant Information RF Interference for USA only Place the projector in a horizontal positionIii Important Information Fire and Shock PrecautionsLamp Replacement Important Information Remote Control PrecautionsTable of Contents Table of Contents Whats in the Box? IntroductionIntroduction to the Projector Features youll enjoyIntroduction Congratulations on Your Purchase of the ProjectorIntroduction Rear Part Names of the ProjectorFront/Top Introduction Bottom Volume Keystone But Tons Enter Button Exit Button Introduction Top FeaturesTerminal Panel Features Power Part Names of the Remote ControlOperating Range for Wireless Remote Control Introduction Battery InstallationSelecting a Location Installation and ConnectionsSetting Up the Screen and the Projector Distance Chart Installation and Connections Throw Distance and Screen SizeReflecting the Image Installation and ConnectionsEnabling the computer’s external display Connecting Your PC or Macintosh ComputerMaking Connections Installation and Connections To connect Scart output RGB Audio Video Audio Lamp Status Power Turning on the Projector Projecting an Image Basic OperationTo select a menu language, follow these steps Projecting an Image Basic OperationSelecting a Source Detecting the Signal AutomaticallyAbout Auto Keystone Correction Adjusting the Picture Size and PositionAbout Auto Focus Lift the front edge of the projector Projecting an Image Basic Operation Adjust the Tilt FootEffective auto focus range for screen Projecting an Image Basic Operation ZoomAuto Focus Projecting an Image Basic Operation Auto Keystone Correction Adjusting with the remote control Adjusting Focus ManuallyAdjusting with buttons on the cabinet Correcting Keystone Distortion Manually Optimizing RGB Picture Automatically Adjusting Volume Up or DownAdjusting the Image Using Auto Adjust Preparation Make sure that the projector is turned off Turning off the ProjectorAfter Use Changing Lamp Mode Convenient FeaturesTurning off the Image and Sound Freezing a PictureConvenient Features Select Off and press the Enter button Connecting the remote mouse receiver to your computer Using the Optional Remote Mouse ReceiverWhen operating a computer via the remote mouse receiver When connecting using the USB terminalUsing the Menus Using On-Screen MenuFor Adjusting items Slide bar Using On-Screen MenuFor Selecting items Return key symbol, Radio button For Selecting items Solid triangleMenu Elements Indicates the Control Panel Lock is enabledPicture List of Menu ItemsReset Menu Descriptions & Functions Picture PresetDetail Settings Selecting Aspect Ratio Aspect Ratio ResetMenu Descriptions & Functions Image Options Turning on Noise Reduction Noise Reduction Setting Telecine Mode TelecineSetup General Menu Descriptions & Functions SetupSelecting Projector Orientation Orientation Using On-Screen Menu Setup InstallationSelecting Communication Speed Communication Speed Disabling the Cabinet Buttons Control Panel LockSelecting Menu Color Menu Color Select Enabling Security SecuritySelecting Menu Display Time Menu Display Time Selecting a Color for Background BackgroundUsing On-Screen Menu Setup Options Usage Time Menu Descriptions & Functions InformationSource VersionClearing Lamp Hour Meter Clear Lamp Hours Menu Descriptions & Functions ResetReturning to Factory Default Reset Cleaning the Lens and Focus Sensor MaintenanceCleaning the Cabinet Cleaning the lensTo replace the lamp MaintenanceReplacing the Lamp Interlock Maintenance Appendix TroubleshootingIndicator Messages Appendix Problem Check These ItemsAppendix Electrical SpecificationsOptical For Europe Appendix MechanicalCabinet Dimensions Pin No RGB Signal Analog YCbCr Signal Pin Assignments of D-Sub Computer Input ConnectorMini D-Sub 15 Pin Connector SXGA+ Compatible Input Signal ListPC Control Codes and Cable Connection PC Control Connector DIN-8PPC Control Codes Cable ConnectionPower Troubleshooting Check ListVideo and Audio OtherSignal cable Installation environmentComputer Video equipmentTravelCare Guide TravelCare a service for international travelersAsia and Middle East Application Sheet for TravelCare Service Program Condition of your TravelCare Service Program

LT35, LT25, LT30 specifications

Acoustic Energy, a prominent name in the audio industry, has made a significant mark with its LT series of loudspeakers: the LT30, LT25, and LT35. These speakers are designed to deliver exceptional sound quality while catering to the needs of audiophiles and casual listeners alike.

The Acoustic Energy LT30 is a versatile floor-standing loudspeaker that offers remarkable performance across various audio genres. Featuring a 3-way driver configuration, the LT30 is equipped with a 1-inch silk dome tweeter for clear high frequencies, a 4-inch midrange driver for detailed vocal reproduction, and dual 6.5-inch woven composite woofers that provide deep, powerful bass response. One of the standout features of the LT30 is its unique cabinet design, which minimizes resonance and maximizes sound clarity, ensuring an immersive listening experience.

For those looking for a slightly smaller option, the LT25 serves as an excellent choice. This compact yet powerful speaker shares similar design elements to the LT30 but features a 2-way configuration. The LT25 utilizes a 1-inch tweeter and a 5-inch mid-bass driver, making it ideal for smaller rooms or as part of a surround sound setup. Its refined sound stage and balanced audio output make it a perfect fit for both music and movie enthusiasts.

The LT35, on the other hand, is designed for larger spaces and offers advanced audio technologies. This model incorporates Acoustic Energy's proprietary driver technology, which ensures accurate sound reproduction and improved efficiency. The 1-inch tweeter and dual 7-inch woofers work in harmony to deliver an expansive soundstage, making it suitable for high-fidelity audio systems and dedicated listening environments.

All three models feature smart design elements, including an integrated grille for aesthetic purposes and strategically placed ports for enhanced bass response. The LT series also focuses on user-friendly connectivity, with binding posts that accommodate a variety of speaker cables and connectors.

Furthermore, each model is crafted with premium materials to ensure longevity and performance, from durable finishes to high-quality drivers. Acoustic Energy's commitment to acoustic excellence is evident across the LT30, LT25, and LT35, making them a solid choice for anyone seeking superior sound quality and design in their audio setup.

These speakers not only stand out in terms of performance but also resonate with the aesthetic appeal, making them a remarkable investment for audio enthusiasts who appreciate quality sound and stylish design.
Top Page Image Contents