Acer RA19WAANU service manual Plug in parallel direction Angel 5 degrees

12

ACER X193HQ

4. Assembly and Disassembly Procedures

Go to cover page

4.1 Assembly procedures:

Connect the cable between power board(P802)

S1 and interface board (P301)

Connect the function key cable into interface

board(P304)

Connect the FFC cable into interface board

P802

P304

P301

FFC

Use a Phillips-head screwdriver screwed the

S2 No.1~4 screws till that power board and bracket chassis base firmly attached.(No1~3 screw size=M3x6; No4 screw size=M4x8; Torque=9~10KGFxCM).

1 2

S4

S5

Take the key function cable out from the hole shown as photo

Fix the function key cable with a PVC tape

Turn the monitor faced down and put it on the bracket chassis module till both parts firmly Connect FFC cable to LCD panel. There are two locks over here when plugging in should be noticed

3 4

Use a Phillips-head screwdriver screwed the

S3 No.1~2 screws till that interface board and bracket chassis base firmly attached.

(No1~2 screw size=M3x6; Torque=9~10KGFxCM).

Plug in parallel direction

1

2

Angel < 5 degrees