Acer RA19WAANU service manual S10

4. Assembly and Disassembly Procedures (continued)

ACER X193HQ 13

Go to cover page

S6	Take lamp cables out from the holes shown as the	S10	Put a rear cover on the assembled unit and
	photo.		press on force mechanisms locked and firmly
			attached.
			4	4
			3	3
			2	2
			1	1
S7	Plug 2 lamp cables to the connectors of inverter		Use a Phillips-head screwdriver screw 1 screw
		S11
	board.		(No1 Screw Size=M4x10; Torque=7.5~9.5KGFxCM).

			1
	Use a Hex-head and Phillips-headscrewdriver	S12	Assemble the stand upper side to the rear cover
S8	screwed the DVI and D-SUB connectors (No.1~4		through the way of screwing 4 screws till both
	Hex Nut screws		units firmly attached.
	Size=M3x8;Torque=6.5±0.5KGFxCM).		(No1~4 Screw Size=M4x10; Torque=12±
	Torque=6.5±0.5KGFxCM).		1KGFxCM).

		2	1
	2	1
		3	4
4		3

Take a key function board to hook with front

S9	bezeland connect to key function cable.	Assemble the hinge cover into both two sides
		S13