Acer RA19WAANU service manual S14 S15 S16, Use properly force to pull up front bezel

S14

S15

S16

4. Assembly and Disassembly Procedures (continued)		ACER X193HQ	17
		Go to cover page
Hold one side of down side that had been	Unplug 2 lamp cables
separated from front bezel	S17

Use properly force to pull up front bezel

Disconnect the FFC cable to the connector of

S18 panel.

Use finger to push the lock according to arrow direction then take out the FFC cable

Unhook the key function board from front bezel,

disconnect the key function cable

		Take out lamp cables right through the No.1-2
Use a Hex-head screwdriver unscrewed 4 screws	S19	square holes and separate the bracket chassis

to release the DVI and D-SUB connectors	module and LCD panel apart.
(No1~4Hex Nut screws
Size=M3x8;Torque=4.5~6.5KGFxCM).

1 2

21

43