BOXLIGHT CP-13t Basic Operations, Turning on / OFF the Projector, Turning on the Projector, Green

Page 20

BASIC OPERATIONS

TURNING ON / OFF THE PROJECTOR

TURNING ON THE PROJECTOR

1	Complete the peripheral connections (with Computer, VCR,
1	and etc.) before turning on the projector. (Refer to
	"CONNECTING TO THE PROJECTOR" on Pages 10~13 for
	connecting those equipment.
2	Connect the projector's AC power cord into a wall outlet. The
2	LAMP indicator lights RED, and the READY indicator lights
	GREEN.
3	Press the power ON-OFF button on the Remote Control Unit or
3	on the Top Control to ON. The LAMP POWER indicator dims,

and the Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts. The signal from the source appears after 30 seconds.

30

The Preparation Display disappears after 30 seconds.

	TURNING OFF THE PROJECTOR
1	Press the power ON-OFF button on the Remote Control Unit or
1	on the Top Control, and the message "Power off?" appears on
	the screen.
2	Press again the power ON-OFF button to turn off the projector.
2	The LAMP indicator lights bright and the READY indicator turns
	off. The Cooling Fans operate for 90 seconds after the
	projector is turned off. (During this "Cooling Down" period, this
	appliance cannot be turned on.)
3	When the cooling the projector has finished, the READY
3	indicator turns to green again and you can turn the projector

on. After cooling down completely, disconnect the AC power cord.

Power off?

The message disappears after 4 seconds.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning the projector on again.

If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:

1.Disconnect the AC power cord from the AC outlet.

2.Check the air filters for dust accumulation.

3.Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 42.)

4.Press the power ON-OFF button to ON.

If the TEMPERATURE WARNING indicator still continues to flash, call Boxlight at 1-800-762-5757 or 360- 779-7901.

NOTE: The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan is working, TEMPERATURE WARNING INDICATOR flashes red.

20

Image 20

Contents Boxlight Risk of Electric Shock Do not Open Safety PrecautionsTo the Owner Important Safety Instructions GroundTable of Contents Features and Design CompatibilityPreparation Name of Each Part of the ProjectorPositioning the Projector SETTING-UP the ProjectorAdjustable Feet Preparation Connecting the AC Power Cord VentilationPreparation Moving the Projector Connecting the Projector Terminals of the ProjectorConnecting to the Video Equipment Connecting the ProjectorUsed cables for connection Video CableMAC Adapter Monitor Cable Connecting to the ComputerVGA Cable Control Cable for PS/2 Port Computer Monitor Control Audio OUT Port MAC Adapter Not suppliedLaser Pointer Function Operation of the Remote ControlBefore Operation Remote Control Batteries Installation Operating RangeTOP Controls and Indicators Flow of ON-SCREEN Menu HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Menu BAR in MCI Mode View MenuBasic Operations Turning on / OFF the ProjectorTurning on the Projector Turning OFF the ProjectorKeystone Adjustment Adjusting the ImageZoom Adjustment Sound Adjustment Sound Volume AdjustmentSound Mute Adjustment Basic Operation No Show FunctionSelecting Computer System Computer ModeSelecting Computer Mode PC Adjustment AdjustTotal lines Total dotsHorizontal / Vertical ClampComputer Mode Compatible Computer Specifications ResolutionFreq KHzAdjust Picture Image Manually Normal FunctionPicture Position Adjustment Computer Mode Auto Image FunctionAuto Image PositionPicture Screen Adjustment Expand functionCompress function Panning functionVideo Mode Selecting Video ModeSelecting Color System AutoAdjusting the Picture Image ColorTint SharpnessMCI Mode HOW to Load the Memory Card Into the ProjectorOperating the PC Card Slot LoadAvailable Card Selecting MCI ModeAvailable Data Selection Show the Data in the Memory CardIndex Selection Access to the Memory Card Through the Projector Write Data Into the Memory CardImage Picture Image AdjustmentAdjust the Picture Image Manually Picture Screen Adjustment Install / Remove the Smartmedia InstallSmartmedia and PC Card Adapter RemoveMCI Mode Precautions and Specifications of the Smartmedia Precautions and Specifications of the PC Card AdapterSelecting Language SettingSetting Menu Operating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance Temperature Warning IndicatorAIR Filter Care and Cleaning Cleaning the Projection LensLamp Replacement Monitor Timer Appendix Lamp Replacement IndicatorLamp Replacement Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Optional Parts Boxlight