BOXLIGHT CP-13t manual Picture Position Adjustment, Computer Mode Auto Image Function

Page 28

COMPUTER MODE

AUTO IMAGE FUNCTION

The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	AUTO IMAGE	and press the SELECT button.
	Another dialog box AUTO IMAGE Menu will appear.
2	Move the arrow to an item that you want to adjust by pressing
	the POINT UP/DOWN button. Change the setting On or Off by

pressing the SELECT button.

Fine sync.

Adjust the picture as necessary to eliminate flicker from the display. This item can be adjusted manually. (Refer to page 27.)

Total dots

The number of the total dots in one horizontal period. This item can be adjusted manually. (Refer to page 27.)

Position

Adjustment of the position of the image. This item can be adjusted manually. (Refer to page 28.)

3	Move the arrow to “Go!” and press the SELECT button to start
	the Auto Image function.

This adjustment can be executed by pressing AUTO IMAGE button on the Top Control and the Remote Control Unit.

Stored Stores the On/Off setting of each item.

Go!	Starts the Auto Image Adjustment.

Quit	Closes the AUTO IMAGE ADJUSTMENT Menu.

It starts the adjustment on the item set to "On".

It terminates the PICTURE IMAGE ADJUSTMENT Menu.

Move the arrow to the item and then press the SELECT button.

NOTE : The Fine sync., Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manual adjustment is required to make fine image. (Refer to page 27 to adjust "Fine sync." or "Total dots" and page 28 to adjust Picture Position.)

PICTURE POSITION ADJUSTMENT

The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	POSITION	and press the SELECT button. The PICTURE
	POSITION dialog box will appear.
2
	Move the image by pressing the POINT UP / DOWN / RIGHT /
	LEFT buttons.

To cancel POSITION mode, press the any buttons except SELECT, RIGHT CLICK, POINT, PAGE ▲/▼ or LASER button. To recall the position previously adjusted, press NORMAL button.

PICTURE POSITION

dialog box

Press the POINT UP /

DOWN / RIGHT / LEFT buttons to move the image

28

Image 28

Contents Boxlight To the Owner Safety PrecautionsRisk of Electric Shock Do not Open Important Safety Instructions GroundTable of Contents Features and Design CompatibilityPreparation Name of Each Part of the ProjectorAdjustable Feet SETTING-UP the ProjectorPositioning the Projector Preparation Connecting the AC Power Cord VentilationPreparation Moving the Projector Connecting the Projector Terminals of the ProjectorConnecting to the Video Equipment Connecting the ProjectorUsed cables for connection Video CableVGA Cable Control Cable for PS/2 Port Connecting to the ComputerMAC Adapter Monitor Cable Computer Monitor Control Audio OUT Port MAC Adapter Not suppliedBefore Operation Operation of the Remote ControlLaser Pointer Function Remote Control Batteries Installation Operating RangeTOP Controls and Indicators Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Before Operation Menu BAR Menu BAR in MCI Mode View MenuBasic Operations Turning on / OFF the ProjectorTurning on the Projector Turning OFF the ProjectorZoom Adjustment Adjusting the ImageKeystone Adjustment Sound Adjustment Sound Volume AdjustmentSound Mute Adjustment Basic Operation No Show FunctionSelecting Computer Mode Computer ModeSelecting Computer System PC Adjustment AdjustTotal lines Total dotsHorizontal / Vertical ClampComputer Mode Compatible Computer Specifications ResolutionFreq KHzAdjust Picture Image Manually Normal FunctionPicture Position Adjustment Computer Mode Auto Image FunctionAuto Image PositionPicture Screen Adjustment Expand functionCompress function Panning functionVideo Mode Selecting Video ModeSelecting Color System AutoAdjusting the Picture Image ColorTint SharpnessMCI Mode HOW to Load the Memory Card Into the ProjectorOperating the PC Card Slot LoadAvailable Data Selecting MCI ModeAvailable Card Index Selection Show the Data in the Memory CardSelection Access to the Memory Card Through the Projector Write Data Into the Memory CardAdjust the Picture Image Manually Picture Image AdjustmentImage Picture Screen Adjustment Install / Remove the Smartmedia InstallSmartmedia and PC Card Adapter RemoveMCI Mode Precautions and Specifications of the Smartmedia Precautions and Specifications of the PC Card AdapterSetting Menu SettingSelecting Language Operating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance Temperature Warning IndicatorAIR Filter Care and Cleaning Cleaning the Projection LensLamp Replacement Appendix Lamp Replacement IndicatorLamp Replacement Monitor Timer Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Optional Parts Boxlight