Onkyo A-9555, A-9755* instruction manual Using the Remote Controller

Remote Controller—Continued

JREPEAT button

This button is used to set the repeat playback func- tions on a CD, MD, or HDD component. On a cas- sette deck, the button is used to switch the repeat playback mode (single side only/both sides).

K PLAYLIST [ ]/[ ] buttons

Selects a playlist stored on the player on an HDD component.

L ALBUM [ ]/[ ] buttons

Selects an album stored on the player on an HDD component.

MPLAY MODE button

This button sets the playback mode on an MD com- ponent.

NGROUP/SEARCH button

This button selects groups on an MD component. On a CD player, it is used to search and select a track number.

OMEMORY button

This button is used to set the memory playback function on a CD or MD component. With memory playback, you can make a custom program.

PENTER button

This button is used to confirm the settings on a CD or MD component.

QCLR button

This button is used to remove the last track from the memory function program, etc., on a CD or MD component.

R INPUT [ ]/[ ] buttons (15)

These buttons are used to select from the following input sources: LINE, HDD, PHONO, CD, TUNER, TAPE or MD.

SDISPLAY button

This button is used to change the information dis- played on a CD or MD component. When the input source is “HDD,” this button turns on the display backlight on the HDD component.

TMUTING button (15)

This button is used to mute the A-9755/A-9555.

U Previous and Next [ ]/[ ] buttons

These buttons are used to select the previous or next track on a CD, MD, or HDD component. Pressing them repeatedly selects earlier or later tracks. On a cassette deck, they’re used for rewind and fast for- ward.

VSCROLL button

This button is used to scroll text displayed on an MD component. When the input source is “HDD,” this button turns on the display backlight on the HDD component.

W MENU, SELECT, [ ]/[ ] buttons

MENU button: Displays the HDD component menu.

SELECT button: Confirms the option on the HDD component menu.

[ ]/[ ] buttons: Selects the option on the HDD component menu.

Using the Remote Controller

Point the remote controller toward the remote control sensor.

Remote control sensor

About 5 m (16 feet)

Notes:

•The remote controller may not work reliably if the A-9755/A-9555 is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights.

Keep this in mind when installing.

•If another remote controller of the same type is used in the same room, or the A-9755/A-9555 is installed close to equipment that uses infrared rays, the remote controller may not work reliably.

•Don’t put anything, such as a book, on the remote con- troller, because the buttons may be pressed inadvert- ently, thereby draining the batteries.

•The remote controller may not work reliably if the A-9755/A-9555 is installed in a rack behind colored glass doors. Keep this in mind when installing.

•The remote controller will not work if there’s an obstacle between it and the A-9755/A-9555’s remote

control sensor.

9