BOXLIGHT MP-350m manual Setting UP the Projector

SETTING UP THE PROJECTOR

1Place the projector on a flat surface.

•The projector must be within 10 feet (3 m) of your power source and within 8 feet (2.4 m) of your computer.

•If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 31 to reverse the image.

•If you are installing the projector on the ceiling, refer to the Ceiling Mount Installation Guide that comes with the Ceiling Mount Kit for more information. To turn the image upside down, see “Ceiling Projection” on page 31. The Ceiling Mount Kit is sold separately.

2Position the projector the desired distance from the screen.

•The distance from the lens of the projector to the screen determines the size of the projected image. Figure 3 shows three projected image sizes using the lens at minimum focusing distance. For more information about image size, see “Projected Image Size” on page 56.

3Make sure the projector and your computer are turned off.

	1
	9
	.
	2
	f
	t
	.
	6
	.
	4
	f
2	t
	.
.
6
f
t
.

	30 ft.
4 ft.	10 ft.

NOTE: An optional extension cable, sold separately, lets you increase the distance between the projector and your computer to 68 feet (21 m). See “Optional Accessories” on page 50.

FIGURE 3

Projected image size (minimum focusing distance)

5